A gravel path is one of the easiest garden projects: a compacted base, a layer of decorative gravel, edging to hold it in and fabric to keep weeds down. This calculator gives the area, the volumes of gravel and base, their weight, the edging and the fabric.
How the calculation works
- Area = length × width
- Surface gravel = area × gravel depth, in cubic yards
- Base = area × base depth
- Weight ≈ 1.4 tons per cubic yard
- Edging = 2 × length
- Fabric = area × 1.1
A 30 × 3 ft path covers 90 sq ft. With 2 in of surface gravel over 3 in of crushed stone base, you need 0.56 cubic yards of gravel and 0.83 of base, about 1.9 tons in all. Edge both sides with 60 ft of edging and lay 99 sq ft of fabric.
Choosing the gravel
| Gravel | Use |
|---|---|
| Pea gravel | Smooth, comfortable, but moves underfoot |
| Crushed stone 3/8 in | Locks together, firm to walk on |
| Decomposed granite | Packs almost like a hard surface |
| River rock | Decorative, not for walking |
Angular stone compacts better than round gravel and suits paths used every day, wheelbarrows and bikes.
Building the path
- Mark the edges and dig out about 5 in, the base plus the gravel.
- Set the edging so its top sits just above the finished gravel.
- Lay fabric over the soil, overlapping seams by 6 in or more.
- Spread the base in 2 in layers, wetting and compacting each one.
- Top with the surface gravel and rake it level.
Width
| Use | Width |
|---|---|
| Stepping path | 2 ft |
| One person comfortably | 3 ft |
| Two people side by side, wheelbarrow | 4 to 5 ft |
Maintenance
Rake the gravel back into place now and then, top it up every few years, and pull the occasional weed before it roots into the base.