This calculator is for general information and education. It is not medical advice and does not replace the advice of your doctor or a registered dietitian.
Aortic stenosis narrows the valve between the heart and the aorta, and its severity is judged mostly by the aortic valve area. This aortic valve area calculator applies the continuity equation to the left ventricular outflow tract (LVOT) diameter and the LVOT and aortic valve velocity time integrals from an echocardiogram to give the valve area, the indexed area, the dimensionless velocity index and the severity grade.
How the calculation works
- LVOT area = 0.785 × diameter², because the outflow tract is treated as a circle.
- Stroke volume = LVOT area × LVOT VTI.
- Aortic valve area = stroke volume ÷ aortic valve VTI, the continuity equation: the same blood passes the outflow tract and the valve.
- Indexed area = valve area ÷ body surface area, and dimensionless index = LVOT VTI ÷ valve VTI.
- Severity: 1.0 cm² or less is severe, 1.0 to 1.5 cm² moderate, above 1.5 cm² mild; an index of 0.6 cm²/m² or less and a ratio of 0.25 or less also point to severe stenosis.
Example
An outflow tract of 2.0 cm has an area of 3.14 cm². With an LVOT VTI of 20 cm the stroke volume is 63 mL. If the aortic valve VTI is 80 cm, the valve area is 0.79 cm², an indexed area of 0.41 cm²/m² for a body surface of 1.9 m², and the dimensionless index is 0.25, all in the severe range.
Why it matters
The velocity across a narrowed valve depends on how much blood the heart is pushing, so a gradient alone can mislead. The valve area is a flow-independent measure that completes the picture, and together with the gradient and the peak velocity it decides whether a patient has mild, moderate or severe stenosis and when to consider valve replacement.
Good to know
The calculation assumes a circular outflow tract and a stable flow, and both can be wrong: the tract is often oval, which makes the area smaller than the circle, and atrial fibrillation or an irregular rhythm changes the VTIs from beat to beat, so values from several beats should be averaged. Small patients can have a valve area under 1.0 cm² without severe disease, which is why the indexed area is shown. The reading of the results belongs to a cardiologist, and this tool does not replace a full echocardiogram report.
Related tools
The mitral valve area calculator applies a pressure half-time method to the other narrowed valve, the cardiac output calculator gives the flow the valve must pass, and the LVH ECG criteria calculator checks for a thickened left ventricle.