Skip to content
Omnikalc

IOL power calculator (SRK II formula)

Enter the A constant of the lens, the axial length, the mean keratometry and the target refraction to get the SRK II adjusted constant, the power for emmetropia, the power for the target, the nearest available power and the expected refraction.

Updated on

Educational tool, not medical advice: this page does not diagnose and does not replace a doctor, nurse or pharmacist. It has not been reviewed by a healthcare professional. Editorial and medical policy

Your inputs

Value out of range

mm

Value out of range

D

Value out of range

D

Value out of range

Results

IOL power for the target refraction

20.78 D

A power in the usual range (about 15 to 25 D)
Adjusted A constant (SRK II)
118.4
IOL power for emmetropia
20.03 D
Nearest power in half-diopter steps
21.0 D
Expected refraction with that power
-0.65 D
Axial length check
23.60 mm
A normal axial length

The IOL power calculator applies the SRK II formula to give the power of an intraocular lens for emmetropia and for a target refraction, from the A constant, the axial length and the keratometry.

How the calculation works

  • Enter the A constant of the lens.
  • Enter the axial length, the keratometry and the target refraction.
  • Read the power and the expected refraction.

Example

With A = 118.4, an axial length of 23.6 mm and a mean K of 43.75 D, the adjusted constant is 118.4, and the power for emmetropia is 118.4 − 2.5 × 23.6 − 0.9 × 43.75 = 20.02 D. For a target of −0.50 D the power is 20.02 + 1.5 × 0.5 = 20.77 D. The nearest power is 21.0 D, which gives an expected refraction of -0.65 D.

Why it matters

The calculator helps ophthalmology residents, optometry and nursing students, and anyone interested in how an implant power is chosen before a cataract operation, to see the weight of each measurement.

Good to know

In the formula, an error of 1 millimeter in axial length changes the power by about 2.5 diopters, so the measurement of the axial length with optical biometry is the main source of precision, and a keratometry error of 1 diopter changes the power by about 0.9 diopter. The factor of 1.5 used to move from the power for emmetropia to the power for the target is an average, and the real ratio depends on the eye. Most surgeons aim for a slightly myopic result in the second eye or with a monofocal lens for near work, and consider the match with the other eye to avoid a large difference in refraction between the two eyes. Special cases such as a previous refractive surgery, a very short or long eye, keratoconus or a toric lens need specific methods and a surgeon with experience. The result here is not a surgical plan and does not replace the calculation made by the surgical team from validated devices.

The keratometry calculator converts corneal radii, the astigmatism vector calculator analyzes the cylinder, the spectacle magnification calculator treats the image size and the Hofstetter calculator treats accommodation.

Frequently asked questions

What is the SRK II formula?

SRK is a regression formula: P = A − 2.5 L − 0.9 K, where A is a constant of the lens, L the axial length in millimeters and K the mean keratometry. SRK II improves it by adjusting A according to the axial length: +3 under 20 mm, +2 from 20 to 21, +1 from 21 to 22, none up to 24.5, and −0.5 above.

Why is the A constant important?

Each model of lens has its own constant, given by the manufacturer, and surgeons optimize it from their own results. Using the constant of another lens model can shift the refraction by a diopter or more.

Is this used in practice?

SRK II is historic and still taught, but most surgeons now use newer theoretical formulas such as SRK/T, Holladay, Hoffer Q, Haigis or Barrett, which are more accurate at the extremes of length. This calculator is for learning only.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.