Skip to content
Omnikalc

Bond number calculator: do gravity or surface tension control your drop or bubble?

Choose a liquid, the gravity and a length to get the Bond number, the capillary length and a note on whether gravity or surface tension dominates.

Updated on
Your inputs
in

Value out of range

Results

Bond number

5.414

Gravity dominates: drops flatten and menisci are small
Capillary length
0.107 in
Length ÷ capillary length
2.327
Surface tension used
72.8 mN/m
Density difference used
62.23 lb/ft³

Surface tension makes drops round and gravity flattens them. The Bond number calculator gives the ratio of the two from the liquid, the gravity and a characteristic length. It also gives the capillary length and the density and surface tension used, so you can see which force controls a drop, a bubble, a meniscus or a liquid in a tank.

How the calculation works

  • Choose the liquid (in air), the gravity of the place and the characteristic length, such as the size of a drop or the diameter of a tube.
  • The calculator takes the density difference between liquid and air and the surface tension of the liquid.
  • The Bond number is Bo = Δρ × g × L² / σ, the ratio of gravity forces to surface tension forces.
  • It also gives the capillary length λ = √(σ / (Δρ g)), the size at which the two forces are equal.

Example

A drop of water, 0.25 in across, sits in air on Earth. With a density difference of 997 kg/m³ and a surface tension of 72.8 mN/m, the Bond number is 5.41. The capillary length is 0.107 in (2.73 mm), and the drop is 2.3 times larger than that, so gravity flattens it.

Why it matters

The Bond number is used in microfluidics, inkjet printing, boiling and condensation, coating, foam and bubble physics, and the management of liquid propellant in space. The calculator makes the scale of the effect clear and shows how the same drop behaves on the Moon, on Mars and in orbit.

Good to know

The calculator uses fixed properties at 68 °F (20 °C) for five liquids in air, with a density difference from air at 1.2 kg/m³. Real values change with temperature, contamination and added surfactants, which can cut the surface tension by half. The length you choose should be the one that is relevant to the problem, such as the drop diameter or the tube diameter, and a factor of 2 in the length is a factor of 4 in the Bond number.

The Weber number calculator compares inertia with surface tension, the capillary rise calculator uses the same surface tension in a tube, the Froude number calculator compares inertia with gravity, and the Reynolds number calculator covers the viscous case.

Frequently asked questions

What does the Bond number tell?

It compares the weight of a fluid piece with the force of its surface tension. For a Bond number far below 1, surface tension wins and drops and bubbles are nearly spherical. For a number far above 1, gravity wins and a puddle spreads flat. Around 1, both are of the same order, and this is the scale of dew drops and small puddles.

What is the capillary length?

It is the length λ = √(σ / (Δρ g)), about 2.7 mm for water in air on Earth. A drop much smaller than λ is round, a liquid rises in a tube much narrower than λ by capillary action, and a meniscus is about this size. The Bond number is the square of the ratio L / λ.

Why does it matter in space?

In orbit, gravity is almost zero, so the Bond number is very small for any size of container. Liquids in tanks and on a space station cling to the walls and form large spheres, and fuel must be moved by surface tension devices or by thrust. This is why liquid management in microgravity is a field of its own.

Is the Eötvös number the same?

Yes. The Eötvös number (Eo) and the Bond number have the same definition in most books, with the symbol Eo preferred for bubbles and drops that move in a fluid, and Bo preferred for capillary and interface problems. Some authors use a factor of 4 or use the diameter or the radius, so check the definition.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.