Skip to content
Omnikalc

Cold temperature altitude correction calculator

Enter the airport elevation, the surface temperature and the altitude of the procedure to get the ISA deviation, the correction to add and the corrected altitude and minimum safe altitude over an obstacle.

Updated on
Your inputs
ft

Value out of range

°C

Value out of range

ft

Value out of range

ft

Value out of range

Results

Deviation from ISA

-37.6 °C

Correction to add

275 ft

Corrected altitude

3,275 ft

Same altitude with the cold correction

3,667 ft

Standard temperature at the elevation
12.6 °C
Height of the procedure altitude above the airport
1,800 ft
Obstacle altitude plus clearance
3,340 ft

The cold temperature altitude correction calculator gives the correction to add to an approach or minimum altitude when the air is colder than standard, from the airport elevation, the surface temperature and the procedure altitude, and it also corrects an obstacle clearance altitude.

How the calculation works

  • Enter the airport elevation and the surface temperature.
  • Enter the altitude of the procedure, the highest obstacle and the required clearance.
  • Read the ISA deviation, the correction and the corrected altitudes.

Example

At -25 °C at an airport at 1200 ft, the standard temperature is 12.6 °C, so the deviation is -37.6 °C. A procedure altitude of 3000 ft is 1,800 ft above the airport and needs 275 ft added: 3,275 ft. An obstacle altitude plus clearance of 3,340 ft becomes 3,667 ft with the correction.

Why it matters

The calculator helps pilots, instrument students and flight departments who fly in winter or in the mountains and need to correct altimeter altitudes for the cold, and shows how large the error becomes with the height above the airport and the temperature.

Good to know

Use the temperature at the airport that provides the altimeter setting, and the height above that airport and not above sea level. The formula is the ICAO approximation and the official tables may round the values upward. Apply the correction only as required by your authority and your procedure, and tell air traffic control when you use corrected altitudes. A table in the approach chart takes priority over this calculation, and the correction is zero when the air is warmer than standard.

The density altitude calculator shows the effect of heat on performance, the barometric pressure calculator links pressure and altitude, the hypsometric equation calculator gives layer thickness and the climb gradient calculator checks departures.

Frequently asked questions

Why does cold air need a correction?

A pressure altimeter assumes a standard atmosphere. In air colder than standard, the pressure levels are closer together, so the aircraft is lower than the altimeter shows. The error grows with the temperature deviation and with the height above the altimeter setting source, so it matters for approaches in cold weather and mountains.

What is the formula?

The approximate correction is the height above the station times the temperature deviation below ISA divided by the absolute temperature at the station minus half the lapse rate times the height: Δh = H × (ISA dev) / (273 + T0 − 0.5 × L × H), with L = 0.00198 °C per foot. It is the same approximation as the one given in the ICAO procedures for air navigation.

When should pilots apply it?

Many authorities require the correction when the temperature at the airport is below a published limit, often 0 °C or below, on the minimum altitudes of an approach and on the minimum safe altitude over obstacles. It is applied to the altitudes at the final fix and to the minimum altitudes of the intermediate segments, while the final approach path is not changed on some systems.

Is a warm day a concern?

In warmer than standard air, the aircraft is higher than the altimeter shows, which is a safe error for obstacle clearance, so no correction is applied. The calculator then gives zero. For the effect of heat on performance, use the density altitude instead.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.