Skip to content
Omnikalc

Critical heat flux calculator: how much heat can a boiling surface carry before burnout?

Choose a liquid and a gravity, then enter the heated area and the heat flux to get the Zuber critical heat flux, the maximum power and the safety margin.

Updated on
Your inputs
ft²

Value out of range

BTU/h·ft²

Value out of range

Results

Critical heat flux (Zuber)

350,759 BTU/h·ft²

Maximum heat for this area
351 kBTU/h
Heat flux used as a share of the critical flux
28.5 %
A safe margin below the critical heat flux
Boiling point of the liquid
212.0 °F

When a surface boils a liquid at a high rate, there is a limit above which the heat transfer collapses. The critical heat flux calculator finds that limit with Zuber’s equation for water, ethanol or liquid nitrogen at atmospheric pressure, for a chosen gravity. With the area and the heat flux of your heater, it gives the maximum heat and the safety margin.

How the calculation works

  • Choose the boiling liquid (water, ethanol or liquid nitrogen at atmospheric pressure), the gravity, the heated area and the heat flux that your heater applies.
  • The calculator takes the latent heat, the densities of liquid and vapor and the surface tension of the liquid.
  • Zuber’s equation gives the critical heat flux: q = 0.131 h_fg ρv^½ [σ g (ρl − ρv)]^¼.
  • It then gives the maximum heat for the area and the share of the critical flux that your heater uses.

Example

Water at 1 atm on Earth has a critical heat flux of 1,106 kW/m², which is 350,800 BTU/h·ft². For a heater of 1 ft², the maximum is 350.8 kBTU/h. A heater applying 100,000 BTU/h·ft² runs at 28.5 % of the critical flux, which is a safe margin. On the Moon, the critical flux of the same water would be only 64 % of its value on Earth.

Why it matters

The critical heat flux sets the upper limit of boiling heat transfer in boilers, nuclear reactors, evaporators, cooling of electronics and cryogenic systems. Knowing it, a designer can choose the area of a heater and keep a safe distance from burnout.

Good to know

Zuber’s equation is for pool boiling of a saturated liquid on a large, clean, flat, horizontal surface at 1 atm, with property values at saturation that are fixed here for three liquids. Flow boiling, subcooling, small heaters, rough or coated surfaces, tubes and other pressures change the CHF, sometimes by a factor of 2 or more. Treat the result as a baseline for a first design.

The latent heat calculator covers the energy of vaporization, the Bond number calculator compares gravity with surface tension in the same way, Newton’s law of cooling calculator covers convection, and the LMTD calculator covers heat exchangers.

Frequently asked questions

What is the critical heat flux?

In pool boiling, the heat flux rises with the wall temperature as bubbles form (nucleate boiling) until it reaches a maximum, the critical heat flux (CHF). Beyond it, vapor covers the surface in a film that insulates it, the heat transfer falls, and a heater with a controlled power overheats and may melt. This event is called burnout or departure from nucleate boiling.

What does Zuber’s equation assume?

Zuber (1959) obtained the CHF from the stability of the vapor jets that rise from a large flat horizontal surface in a saturated liquid. The result, q = 0.131 h_fg ρv^½ [σ g (ρl − ρv)]^¼, depends on the liquid and the vapor properties, and on gravity to the power 1/4, but not on the surface material.

Why is the margin so important?

A heater with a fixed power, such as an electric element or a nuclear fuel rod, cannot follow the drop in heat transfer past the CHF: its temperature jumps by hundreds of degrees in a second. Designers keep the heat flux at 50 to 70 % of the CHF, depending on the uncertainty of the correlation and on the consequences of a failure.

How does gravity change it?

The CHF varies as g^¼, so it falls to 78 % on Mars (3.71 m/s²) and 64 % on the Moon (1.62 m/s²), and in microgravity it is much lower. This matters for cooling systems in spacecraft and for experiments on the International Space Station.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.