Skip to content
Omnikalc

Heat of combustion calculator: how much heat does your fuel release?

Choose a fuel and enter its mass and the efficiency of the appliance to get the heat released in MJ, kWh and kBtu, the useful heat and the equivalent in gasoline and heater hours.

Updated on
Your inputs

Value out of range

%

Value out of range

Results

Heat released in kilowatt-hours

58.5 kWh

Useful heat delivered

46.8 kWh

Heat released
210.5 MJ
Heat released in kBtu
199.5 kBtu
Gasoline gallon equivalent
1.75 gal
Hours of a 1,500 W heater
31.2 hours

The energy in a fuel is the energy that comes out when it burns. This heat of combustion calculator takes a fuel, its mass and the efficiency of the appliance to show the heat released in megajoules, kilowatt-hours and kBtu, the useful heat, the gasoline equivalent and the hours of a 1,500 W heater the fuel could supply.

How the calculation works

  • Heat released = mass of fuel in kilograms × heating value in megajoules per kilogram.
  • Kilowatt-hours = megajoules ÷ 3.6, and kBtu = megajoules × 0.947817.
  • Useful heat = heat released × appliance efficiency. The rest leaves with the exhaust gases.
  • Gasoline gallon equivalent = megajoules ÷ 120.2, and heater hours = useful kWh ÷ 1.5 kW.

Example

Burning 10 lb of propane (4.54 kg) in a heater with an efficiency of 80 %. The heat released is 4.54 × 46.4 = 210.5 MJ, which is 58.5 kWh or 199.5 kBtu. The useful heat is 58.5 × 0.8 = 46.8 kWh, enough to run a 1,500 W space heater for 31.2 hours. In gasoline terms, it is 1.75 gallons.

Why it matters

Comparing fuels by their price per unit of weight or volume is misleading, because each fuel delivers a different amount of energy. Converting to kilowatt-hours puts propane, wood, gasoline and electricity on one scale, which is what you need to decide which heating option costs less or to size a fuel supply for a trip or a power outage.

Good to know

Values are typical averages. Wood varies with the species and moisture, and a log with 20 % moisture gives about 20 % less usable heat than the dry figure, since part of the energy dries the wood. Coal, gasoline and natural gas vary with the grade and blend. The efficiency of the appliance is as important as the heating value: a modern gas furnace reaches 95 %, a wood stove 70 to 80 % and an open fireplace 10 to 20 %. Burning fuel indoors needs ventilation, because incomplete combustion produces carbon monoxide.

The heating oil calculator estimates the oil needed for a season, the propane tank calculator sizes a tank and the heat loss calculator estimates how much heat a building needs.

Frequently asked questions

What is the heat of combustion?

It is the heat released when a unit of fuel burns completely in oxygen. It is also called the heating value or calorific value and is given per kilogram, per mole or per volume.

What is the difference between higher and lower heating value?

The higher heating value counts the heat recovered when the water in the exhaust condenses, the lower value does not. The figures here are lower heating values, the ones used for engines and most appliances.

Why is useful heat lower than heat released?

A part of the heat goes up the flue with the hot exhaust, and a part is lost through the walls of the appliance. A condensing boiler recovers much of it and a fireplace loses most of it.

Which fuel has the most energy per kilogram?

Hydrogen has the highest at 120 MJ/kg, but it is very light and takes a lot of volume. Per liter, gasoline and diesel beat it by a wide margin.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.