Skip to content
Omnikalc

Hertz contact stress calculator: how high is the pressure where two curved surfaces touch?

Enter the force, the radii and the elastic properties of two bodies to get the contact radius, the maximum pressure and the maximum shear stress.

Updated on
Your inputs
lbf

Value out of range

in

Value out of range

in

Value out of range

Mpsi

Value out of range

Value out of range

Mpsi

Value out of range

Value out of range

Results

Maximum contact pressure

276.0 ksi

Radius of the contact circle
0.0132 in
Approach of the two bodies
0.346 mil
Maximum shear stress (about 0.31 of the pressure)
85.6 ksi
Depth of the maximum shear stress
0.0063 in

When a ball touches a plane, the force is spread over a tiny circle and the pressure there is huge. The Hertz contact stress calculator takes the force, the radii of the two bodies, which can be a sphere on a flat surface or two spheres, and the Young’s modulus and Poisson’s ratio of each, and gives the maximum contact pressure, the radius of the contact circle, the approach of the bodies, the maximum shear stress and its depth.

How the calculation works

  • Enter the normal force pressing the two bodies together and the radius of each body. Enter 0 for the radius of body 2 if it is a flat surface.
  • Enter the Young’s modulus and Poisson’s ratio of each material, such as 30 Mpsi and 0.3 for steel.
  • The calculator finds the reduced radius 1/R* = 1/R₁ + 1/R₂ and the reduced modulus 1/E* = (1 − ν₁²)/E₁ + (1 − ν₂²)/E₂.
  • The contact radius is a = (3 F R / (4 E))^(1/3)**, and the maximum pressure at its centre is p₀ = 3F / (2π a²).

Example

A steel ball of 1 in diameter (R = 0.5 in) presses on a flat steel plate with 100 lbf. The reduced modulus is 16.5 Mpsi, and the contact radius is 0.0132 in. The maximum pressure is 3 × 100 / (2π × 0.0132²) = 276 ksi, the maximum shear stress is about 85.6 ksi at a depth of 0.0063 in, and the two bodies approach each other by 0.35 mil.

Why it matters

Contact stress decides whether a bearing, a gear, a cam or a rail will pit and spall, or last for millions of cycles. A quick check shows how the pressure grows only with the cube root of the force, how a larger radius helps and how a stiffer material makes the stress higher.

Good to know

The calculator is for the point contact of spheres or a sphere on a plane, with the Hertz assumptions of elastic, frictionless and smooth bodies. It does not handle line contact of cylinders, concave contacts, plastic deformation, friction, lubrication or surface layers. The shear stress factor of 0.31 holds for a Poisson’s ratio of 0.3. Use bearing and gear standards for real designs.

The Young’s modulus calculator covers stiffness, the Poisson’s ratio calculator relates strains, the principal stress calculator finds main stresses, and the Brinell hardness calculator relates hardness to strength.

Frequently asked questions

What is Hertzian contact stress?

It is the stress where two curved elastic bodies touch under load. Heinrich Hertz solved it in 1881. The contact is not a point but a small area, and the stress there is very high compared with the average stress in the bodies. It governs the life of rolling bearings, gears, cams, wheels on rails and ball joints.

Why is the maximum shear stress below the surface?

In a Hertz contact, the largest shear stress lies at a depth of about half the contact radius, not on the surface. This is where fatigue cracks start in rolling bearings and gears, and where a hardened case must be deep enough to support the load. The calculator gives about 0.31 of the pressure at a depth of 0.48 times the contact radius for a ratio of 0.3.

What do I enter for a flat surface or a groove?

For a sphere on a plane, enter 0 for the radius of body 2. For two spheres in contact, enter both radii. A ball in a concave groove would need a negative radius, which this simple calculator does not handle. For cylinders in line contact, a different formula applies, with a contact width and not a circle.

What are the assumptions?

The bodies are elastic, smooth, homogeneous and isotropic, the contact is frictionless, and the contact area is small compared with the radii. The material must stay elastic, so compare the maximum shear stress with the yield strength. Surface roughness, lubrication, residual stress and the hardness of the case make real contacts different.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.