Skip to content
Omnikalc

Laplace pressure calculator: pressure inside a droplet or bubble

Choose the type, the surface tension and the radius to get the excess pressure inside a droplet, a gas bubble or a soap bubble.

Updated on
Your inputs

Value out of range

Value out of range

Results

Excess pressure inside

145.60 Pa

A small excess pressure, as for a large drop or bubble
Excess pressure in millibars
1.456 mbar
Excess pressure as a share of one atmosphere
0.144%
Radius at which the excess pressure reaches one atmosphere
1.437 μm

Inside a droplet or a bubble, the pressure is higher than outside. Surface tension pulls the surface inward like a stretched skin, and the pressure inside has to balance it. This is the Laplace pressure, and it grows fast as the radius shrinks. This calculator gives the excess pressure for a droplet, a gas bubble or a soap bubble.

How the calculation works

  • Droplet or bubble in a liquid: ΔP = 2 × surface tension ÷ radius
  • Soap bubble (two surfaces): ΔP = 4 × surface tension ÷ radius
  • Radius for one atmosphere: r = factor × surface tension ÷ 101,325 Pa, with the factor 2 or 4

The surface tension is in newtons per meter, and 1 mN/m divided by 1 mm gives 1 Pa.

Example

A water droplet of 1 mm radius with a surface tension of 72.8 mN/m has an excess pressure of 2 × 72.8 ÷ 1 = 145.6 Pa, or 1.456 mbar, which is 0.144 % of an atmosphere. The pressure would rise to a full atmosphere only for a radius of 1.437 μm. A soap bubble of 30 mm radius with 25 mN/m has just 3.33 Pa.

Why it matters

The effect shapes many everyday things: why droplets are round, why raindrops hold together, why bubbles in foam merge and why very fine mist droplets evaporate faster. It is used in inkjet printers, in lung physiology, where tiny air sacs need a surfactant to avoid collapsing, and in the study of emulsions and foams.

Good to know

The formula is for a sphere. A curved surface with two different radii, such as a cylinder, gives γ × (1 ÷ r1 + 1 ÷ r2). Surface tension depends on the temperature and on contaminants, and surfactants lower it a lot. For nanometer-sized bubbles, the simple model needs corrections. This tool is for education.

In practice

Shrink the radius and watch the pressure rise: a water droplet of 10 μm has an excess pressure of 14,560 Pa, about 14 % of an atmosphere, and a droplet of 1 μm reaches more than an atmosphere. Compare this with a large drop of 5 mm, which has only 29 Pa. The effect is negligible for large drops and decisive for mists and foams.

The capillary rise calculator uses the same surface tension to find how high a liquid climbs in a tube, the Weber number calculator compares inertia with surface tension, and the hydrostatic pressure calculator handles pressure in a liquid.

Frequently asked questions

What is the Laplace pressure?

It is the extra pressure inside a curved liquid surface, caused by surface tension. For a spherical droplet or a gas bubble in a liquid it is 2γ ÷ r, and the smaller the radius, the larger the pressure.

Why is a soap bubble 4γ ÷ r?

A soap bubble has two surfaces, one inside and one outside the thin film, and each adds a term 2γ ÷ r. The total excess pressure inside is therefore twice that of a droplet of the same radius and surface tension.

Why is it hard to blow up a small balloon at first?

The smaller the radius of curvature, the higher the pressure needed for the same tension. For a rubber balloon the tension also changes with stretch, which is why the first breath is the hardest.

Does the pressure explain why small bubbles dissolve?

Yes. The pressure inside a very small bubble is high, which pushes the gas into the liquid. Small bubbles shrink and disappear while larger ones grow, a process called Ostwald ripening, important in foams and emulsions.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.