Skip to content
Omnikalc

Optical étendue calculator

Enter the emitting area and angle of a source and the aperture and angle of a receiver to get both étendues and the best coupling efficiency any optics can reach.

Updated on
Your inputs
mm²

Value out of range

°

Value out of range

mm

Value out of range

°

Value out of range

Value out of range

Results

Maximum coupling efficiency

47.4 %

Étendue of the source
3.142 mm² sr
Étendue accepted by the receiver
1.488 mm² sr
Receiver half-angle needed for full coupling
22.1 °
Receiver diameter needed for full coupling at this angle
4.36 mm
Numerical aperture of the receiver
0.259

The optical étendue calculator gives the étendue of a source and of a receiver, the maximum coupling efficiency, the receiver angle or diameter needed for full coupling and the numerical aperture, from areas and half-angles.

How the calculation works

  • Enter the emitting area and half-angle of the source: 90 degrees for a Lambertian emitter.
  • Enter the diameter and acceptance half-angle of the receiver, and its refractive index.
  • Read the maximum coupling efficiency and what the receiver needs for full coupling.

Example

A source of 1 mm² mm² emitting into 90 ° degrees has an étendue of 3.142 mm² sr. A receiver of 3 mm mm accepting 15 ° degrees accepts 1.488 mm² sr, so at most 47.4 % of the light is coupled. Full coupling needs a half-angle of 22.1 ° or a diameter of 4.36 mm.

Why it matters

The calculator helps optical designers, lighting engineers and students who couple LEDs, lasers or fibers to a lens, a light guide or a sensor, and who want to know the best possible efficiency before designing the optics.

Good to know

The result is an upper limit, not a prediction: real optics have aberrations, reflection losses and a finite fill, so the efficiency reached is lower. The formula uses a uniform source and receiver, and a small-area, flat approximation with the half-angle in the medium of each. A source of unequal brightness or an oblong shape needs a more careful integral. For a receiver in glass, use the refractive index of the glass, because the acceptance angle is measured in that medium. A 100 percent result means that the étendue does not limit the coupling, but other factors still can.

The numerical aperture calculator relates angle and index, the lensmaker calculator sizes lenses, the illuminance calculator gives light levels at a distance and the lumens calculator converts light output.

Frequently asked questions

What is étendue?

Étendue, or throughput, measures how spread out a beam is in both area and angle. For a flat surface of area A emitting into a half-angle θ, the étendue is G = π n² A sin²θ. It is conserved through any lossless optical system, so no lens or mirror can reduce it, which is the optical form of the second law of thermodynamics.

Why does it limit the coupling?

A receiver can only accept light whose étendue fits within its own area and acceptance angle. If the source étendue is larger, the surplus light cannot be collected, whatever optics are placed between them. The best possible efficiency is the ratio of the receiver étendue to that of the source, limited to 100 percent.

What is a Lambertian source?

It is a source that emits with a brightness independent of the angle, as an LED die or a matte surface, with a half-angle of 90° and étendue π A. An LED with a 1 mm² die has an étendue of about 3.14 mm² sr, which is why it is difficult to focus its light into a small fiber or a narrow beam.

How can the coupling be improved?

By choosing a source with a smaller étendue, such as a laser or a smaller die, by using a receiver with a larger area or a higher acceptance angle, or by immersing the receiver in a medium with a higher index, which raises the étendue by n². Optics can reshape the light but not squeeze it beyond this limit.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.