Skip to content
Omnikalc

Otto cycle calculator: what is the ideal efficiency of a petrol engine?

Enter the compression ratio, the heat capacity ratio and the intake and peak temperatures to get the ideal efficiency, the temperatures and the heat and work per kilogram of air.

Updated on
Your inputs
:1

Value out of range

Value out of range

°C

Value out of range

°C

Value out of range

Results

Thermal efficiency

59.4%

Temperature after compression
461 °C
Temperature at the end of expansion
569 °C
Heat added per kg of air
961 kJ/kg
Net work per kg of air
571 kJ/kg

The Otto cycle is the textbook model of a petrol engine. The Otto cycle calculator takes the compression ratio, the heat capacity ratio, the intake air temperature and the peak temperature and gives the ideal thermal efficiency, the temperature after compression, the temperature at the end of expansion, the heat added and the net work per kilogram of air.

How the calculation works

  • Thermal efficiency η = 1 − 1 ÷ r^(γ − 1), where r is the compression ratio and γ the heat capacity ratio. It depends only on r and γ, not on the fuel or the peak temperature.
  • Temperature after compression T2 = T1 × r^(γ − 1), with temperatures in kelvin (°C + 273.15), and temperature at the end of expansion T4 = T3 ÷ r^(γ − 1).
  • Heat added = cv × (T3 − T2), with cv = R ÷ (γ − 1) and R = 0.287 kJ/(kg·K) for air.
  • Net work = heat added − heat rejected, where the rejected heat is cv × (T4 − T1). Dividing the net work by the heat added gives back the efficiency.

Example

An Otto cycle with a compression ratio of 9.5, γ = 1.4, intake air at 25 °C and a peak temperature of 1,800 °C has an efficiency of 1 − 1 ÷ 9.5^0.4 = 59.4%. The air reaches 461 °C after compression and 569 °C at the end of expansion. The heat added is about 961 kJ/kg and the net work about 571 kJ/kg. Real engines reach only 25 to 35% because of friction, heat loss and incomplete combustion.

Why it matters

Engineering students use the cycle to understand why engines are limited, and it shows quickly how the compression ratio drives efficiency. It is also a baseline against which real engines, turbocharged engines and engines with different fuels can be compared.

Good to know

The model assumes cold-air standard conditions: constant specific heats, no friction, no heat loss and instantaneous combustion at constant volume. Real values will be lower. The results are per kilogram of working fluid, not per engine. Use γ = 1.3 for a rough allowance for hot combustion gases.

The compression ratio calculator relates cylinder volumes to the ratio and the Carnot efficiency calculator gives the theoretical limit for any heat engine.

Frequently asked questions

What is the Otto cycle?

It is the idealized cycle of a spark-ignition engine. Air is compressed without heat exchange, heat is added at constant volume by combustion, the gas expands without heat exchange, and heat is rejected at constant volume. It assumes air as a perfect gas and reversible processes, so it gives an upper bound.

Why does a higher compression ratio raise the efficiency?

A higher ratio raises the average temperature at which heat is added, and the cycle efficiency follows 1 − 1 ÷ r^(γ − 1). The ratio is limited in petrol engines by knock, where the mixture ignites too early. Fuels with a higher octane rating allow higher ratios.

Why is real efficiency so much lower?

The ideal cycle ignores friction, pumping losses, heat transferred to the cooling system, incomplete combustion and the fact that real gases have a lower γ than cold air. Together they cut the efficiency to about half of the ideal value, or even less at part load.

Does the peak temperature change the efficiency?

No. In the ideal Otto cycle the efficiency depends only on the compression ratio and γ. The peak temperature changes the heat added and the work per kilogram of air, so it sets the power of the engine, not its ideal efficiency.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.