Skip to content
Omnikalc

Brayton cycle calculator: what is the efficiency of a gas turbine?

Enter the pressure ratio, the temperatures and the compressor and turbine efficiencies to get the ideal and actual efficiency, the net work, the heat added and the back work ratio.

Updated on
Your inputs
:1

Value out of range

Value out of range

°C

Value out of range

°C

Value out of range

%

Value out of range

%

Value out of range

Results

Actual thermal efficiency

37.8%

Ideal thermal efficiency
50.8%
Compressor outlet temperature
366 °C
Net work per kg of air
279 kJ/kg
Heat added per kg of air
738 kJ/kg
Back work ratio (share of turbine work used by the compressor)
55.8%

The Brayton cycle describes a gas turbine, in which air is compressed, heated and expanded. The Brayton cycle calculator takes the pressure ratio, the heat capacity ratio, the inlet temperatures and the efficiencies of the compressor and turbine and gives the ideal and actual thermal efficiency, the compressor outlet temperature, the net work, the heat added and the back work ratio.

How the calculation works

  • Ideal thermal efficiency η = 1 − 1 ÷ rp^((γ − 1) ÷ γ), where rp is the pressure ratio of the compressor. A higher pressure ratio gives a higher ideal efficiency.
  • Compressor work = cp × T1 × (rp^((γ − 1) ÷ γ) − 1) ÷ compressor efficiency, and turbine work = turbine efficiency × cp × (T3 − T3 ÷ rp^((γ − 1) ÷ γ)). Here cp = γ × R ÷ (γ − 1) with R = 0.287 kJ/(kg·K).
  • Net work = turbine work − compressor work, and heat added = cp × (T3 − T1) − compressor work, because the compressor already heats the air.
  • Actual efficiency = net work ÷ heat added, and the back work ratio = compressor work ÷ turbine work.

Example

A gas turbine with a pressure ratio of 12, air entering the compressor at 15 °C, a turbine inlet temperature of 1,100 °C, a compressor efficiency of 85% and a turbine efficiency of 90% has an ideal efficiency of 1 − 1 ÷ 12^0.2857 = 50.8%. Taking the losses into account, the compressor outlet is at 366 °C, the net work is about 279 kJ/kg, the heat added about 738 kJ/kg, and the actual efficiency is 37.8%. The compressor takes 55.8% of the turbine work.

Why it matters

The cycle sets how much of a fuel’s energy a gas turbine turns into power, and it shows why component efficiency is so important. It is used to size power plants, aircraft engines and turbochargers in teaching and in first design studies.

Good to know

The model is an air-standard cycle with constant specific heats, no pressure losses in the combustor and no mass added by the fuel. Real turbines have lower efficiency. The results are per kilogram of air, and the power output is the net work multiplied by the air mass flow.

The Carnot efficiency calculator gives the upper limit between two temperatures and the compression ratio calculator covers the piston-engine case.

Frequently asked questions

What is the Brayton cycle?

It is the cycle of a gas turbine and a jet engine. Air is compressed, heated at constant pressure in a combustor, expanded through a turbine that drives the compressor and delivers the useful work, and then released. In a closed version the gas goes through a heat exchanger instead of being released.

Why is the back work ratio so high?

Compressing a gas takes a lot of work, and in a gas turbine the compressor uses 40 to 60% of what the turbine produces. In a steam plant, pumping a liquid costs far less, so the ratio is a few percent. The back work ratio is why component efficiencies matter so much for gas turbines.

How can the efficiency be raised?

Use a higher pressure ratio and a higher turbine inlet temperature, which is limited by the blade materials and cooling. Other options are a regenerator that preheats the air with the exhaust, intercooling between compressor stages, and a combined cycle that uses the exhaust heat to make steam.

Are the results for a jet engine?

In a jet engine the turbine only drives the compressor, and the remaining energy goes into a fast exhaust jet that produces thrust. The calculator gives the net work of the cycle, as in a power-generating turbine. It can still show how the pressure ratio and temperature set the available energy.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.