Skip to content
Omnikalc

Rankine cycle efficiency calculator

Enter the enthalpies from the steam tables, the pressures and the component efficiencies to get the net work, the thermal efficiency and the steam flow.

Updated on
Your inputs
kJ/kg

Value out of range

kJ/kg

Value out of range

kJ/kg

Value out of range

m³/kg

Value out of range

kPa

Value out of range

kPa

Value out of range

%

Value out of range

%

Value out of range

MW

Value out of range

Results

Thermal efficiency

29.98 %

Turbine work
909.5 kJ/kg
Pump work
5.04 kJ/kg
Heat added in the boiler
3,017.2 kJ/kg
Back work ratio
0.55 %
Steam flow for the net power
110.6 kg/s
Heat rate
12,009 kJ/kWh

The Rankine cycle efficiency calculator gives the turbine work, the pump work, the heat added, the thermal efficiency, the back work ratio, the steam flow for a net power and the heat rate of a simple steam cycle.

How the calculation works

  • Enter the enthalpies at the turbine inlet, the isentropic turbine outlet and the saturated liquid at the condenser.
  • Enter the boiler and condenser pressures, the volume of the liquid and the efficiencies of the turbine and the pump.
  • Enter the net power wanted to get the steam flow.

Example

With 3214 kJ/kg at the turbine inlet and an isentropic outlet of 2144 kJ/kg, a turbine of 85 % produces 909.5 kJ/kg. The pump takes 5.04 kJ/kg, a back work ratio of 0.55 %, and the boiler adds 3,017.2 kJ/kg. The thermal efficiency is 29.98 % and a net power of 100 MW needs 110.6 kg/s of steam, a heat rate of 12,009 kJ/kWh.

Why it matters

The calculator helps thermal engineering students, power plant engineers, energy auditors and people who evaluate a steam turbine, a biomass plant or a waste-heat cycle and want a quick estimate of the efficiency and of the steam flow.

Good to know

The cycle is a simple one, without superheating beyond the inlet state, reheat or feedwater heating, and with ideal heat exchangers and no pressure drops. Real plants lose a few points to the generator, the auxiliary equipment and the pipes. Use the enthalpy of the actual inlet state, and the isentropic enthalpy at the same entropy: a wrong entropy gives a wrong outlet. A lower condenser pressure gives more work but a wetter steam at the turbine exit, so check that the dryness fraction stays above 0.88 to protect the blades.

The flash steam calculator gives the steam released by a pressure drop, the steam pipe sizing calculator sizes the lines, the Carnot efficiency calculator gives the upper limit between two temperatures and the coefficient of performance calculator treats the reverse cycle of a heat pump.

Frequently asked questions

What is the Rankine cycle?

The Rankine cycle is the basic cycle of a steam power plant. A pump raises the pressure of the liquid water, the boiler turns it to steam, the steam expands in a turbine to produce work and the condenser returns it to liquid. The efficiency is the net work divided by the heat added in the boiler.

Where do I get the enthalpies?

Take them from the steam tables or a property calculator. The inlet enthalpy h1 is read at the boiler pressure and the steam temperature, the isentropic outlet enthalpy h2s is read at the condenser pressure for the same entropy, and h3 is the enthalpy of saturated liquid at the condenser pressure. The defaults are for 4 MPa, 400 °C and a condenser at 10 kPa.

How do I raise the efficiency?

Raise the boiler pressure and the steam temperature, lower the condenser pressure, add superheating, reheat and feedwater heaters, and use turbines with a high isentropic efficiency. Modern plants with supercritical steam reach 40 to 45 %, while a simple cycle like the default is near 30 %.

What is the back work ratio?

It is the pump work divided by the turbine work. In a steam cycle it is small, under 1 % for typical pressures, because it is cheap to pump a liquid. In a gas turbine cycle the compressor takes 40 to 60 % of the turbine work, which is why steam plants reach a high net output for the same turbine.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.