Skip to content
Omnikalc

Diesel cycle calculator: what is the ideal efficiency of a diesel engine?

Enter the compression ratio, the cutoff ratio, the heat capacity ratio and the intake temperature to get the ideal efficiency, the temperatures and the heat and work per kilogram of air.

Updated on
Your inputs
:1

Value out of range

Value out of range

Value out of range

°C

Value out of range

Results

Thermal efficiency

63.2%

Temperature after compression
674 °C
Temperature after combustion
1,622 °C
Temperature at the end of expansion
514 °C
Heat added per kg of air
952 kJ/kg
Net work per kg of air
601 kJ/kg

The Diesel cycle describes a compression-ignition engine, where fuel burns at nearly constant pressure. The Diesel cycle calculator takes the compression ratio, the cutoff ratio, the heat capacity ratio and the intake air temperature and gives the ideal thermal efficiency, the temperatures at three points, the heat added and the net work per kilogram of air.

How the calculation works

  • Thermal efficiency η = 1 − (1 ÷ r^(γ − 1)) × (ρ^γ − 1) ÷ (γ × (ρ − 1)), where r is the compression ratio and ρ the cutoff ratio. The cutoff ratio measures how long fuel burns while the piston moves.
  • Temperatures: T2 = T1 × r^(γ − 1) after compression, T3 = T2 × ρ after combustion at constant pressure, and T4 = T1 × ρ^γ at the end of expansion, all in kelvin.
  • Heat added = cp × (T3 − T2), with cp = γ × R ÷ (γ − 1) and R = 0.287 kJ/(kg·K) for air.
  • Net work = heat added − cv × (T4 − T1), where cv = R ÷ (γ − 1).

Example

A Diesel cycle with a compression ratio of 18, a cutoff ratio of 2, γ = 1.4 and intake air at 25 °C has an efficiency of 63.2%. The air reaches 674 °C after compression, 1,622 °C after combustion and 514 °C at the end of expansion. The heat added is about 952 kJ/kg and the net work about 601 kJ/kg. Real diesel engines reach 35 to 45%.

Why it matters

The cycle explains why diesel engines are more efficient than petrol engines, and how the load affects the result. It is a standard topic in thermodynamics and automotive courses, and a baseline for comparing design choices.

Good to know

The model is an air-standard cycle with constant specific heats and no losses, so real engines are well below the value. Modern engines use a dual cycle, where part of the heat is added at constant volume, which lies between the Otto and Diesel results. The results are per kilogram of air.

The compression ratio calculator relates cylinder volumes to the ratio and the Carnot efficiency calculator gives the upper limit for any heat engine.

Frequently asked questions

How does the Diesel cycle differ from the Otto cycle?

In the Diesel cycle heat is added at constant pressure, as fuel is injected and burns while the piston moves down, and not at constant volume. The air is compressed alone, so the compression ratio can be much higher, 14 to 22 against 8 to 12, without knock. That is why diesel engines are more efficient.

What is the cutoff ratio?

It is the volume at the end of combustion divided by the volume at the start. A value of 1 means no heat is added, and a larger value means more fuel burned per cycle, so more power. The efficiency falls as the cutoff ratio rises, which is why diesel engines are most efficient at light load.

What compression ratio do diesel engines use?

Most road diesel engines have a compression ratio between 15 and 20, and large marine engines may be higher. The high ratio heats the air above the ignition temperature of the fuel, which ignites on injection without a spark plug.

Is the efficiency the same as the fuel economy?

No. The result is the ideal efficiency of the cycle on air. The efficiency of a real engine and the fuel consumption depend on friction, heat loss, the fuel and the load. The ideal value is useful to compare designs, not to predict litres per 100 kilometres.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.