Skip to content
Omnikalc

Prandtl number calculator: momentum versus heat diffusion

Enter the specific heat, the viscosity, the thermal conductivity and the density to get the Prandtl number and the kinematic and thermal diffusivities.

Updated on
Your inputs

Value out of range

Value out of range

W/(m·K)

Value out of range

kg/m³

Value out of range

Results

Prandtl number

6.993

Water and light liquid range: the thermal boundary layer is thinner than the velocity one
Kinematic viscosity
1.002 mm²/s
Thermal diffusivity
0.1433 mm²/s
Ratio of velocity to thermal boundary layer thickness (laminar plate)
1.91

When a fluid flows past a hot surface, two things spread out: the velocity and the heat. The Prandtl number tells which one spreads faster. It is a property of the fluid and shows up in every heat transfer correlation. This calculator gives it from the specific heat, the viscosity and the conductivity, along with the kinematic viscosity and the thermal diffusivity.

How the calculation works

  • Prandtl number Pr = specific heat × dynamic viscosity ÷ thermal conductivity
  • Kinematic viscosity ν = dynamic viscosity ÷ density
  • Thermal diffusivity α = conductivity ÷ (density × specific heat)
  • Check: Pr = ν ÷ α
  • Boundary layers (laminar flow along a plate): velocity layer ÷ thermal layer ≈ Pr^⅓

Example

Water at 20 °C: specific heat 4,182 J/(kg·K), viscosity 1.0 mPa·s, conductivity 0.598 W/(m·K) and density 998 kg/m³. The Prandtl number is 6.99. The kinematic viscosity is 1.002 mm²/s and the thermal diffusivity 0.1433 mm²/s, so momentum diffuses about 7 times faster than heat. The velocity layer is about 1.91 times thicker than the thermal layer.

Why it matters

The Prandtl number decides the shape of the temperature profile near a wall and the size of the heat transfer coefficient. It is needed to estimate the cooling of a pipe, a radiator, a chip or a turbine blade. It also shows when a fluid is a good coolant: high conductivity and low Prandtl number mean heat moves quickly through it.

Good to know

The properties must be taken at the same temperature, usually the film temperature or the bulk temperature, depending on the correlation. For turbulent flow the effective Prandtl number is different from the molecular one. The values above are for a pure fluid. This tool is for education.

In practice

Compare the same fluid at two temperatures to see how much the number can change. Water at 0 °C (specific heat 4,217, viscosity 1.79 mPa·s, conductivity 0.561) gives a Prandtl number of 13.5, while water at 100 °C (4,216, 0.282 and 0.679) gives 1.75. The hotter water is far less viscous, so heat transfer by moving water is easier to predict at high temperature.

The Nusselt number calculator gives the heat transfer coefficient, the Reynolds number calculator characterizes the flow, and the specific heat calculator finds the energy to heat a mass.

Frequently asked questions

What is the Prandtl number?

It is the ratio of how quickly momentum diffuses (the kinematic viscosity) to how quickly heat diffuses (the thermal diffusivity): Pr = cp × μ ÷ k. It depends on the fluid and the temperature, not on the flow.

What are typical values?

Gases are around 0.7, water at room temperature about 7, light oils from 50 to 200 and engine oils in the thousands. Liquid metals are very low, around 0.01, because they conduct heat well.

How is it used in heat transfer?

With the Reynolds number it enters the correlations for the Nusselt number, which give the heat transfer coefficient. A high Prandtl number means a thin thermal boundary layer and a high heat transfer for a given flow.

Does it change with temperature?

Yes. For water it falls from about 13 at 0 °C to 1.7 at 100 °C, because the viscosity falls faster than the other properties. For gases it changes little.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.