Skip to content
Omnikalc

Porosity and void ratio calculator: how much of the soil is empty space?

Enter the dry bulk density, the grain density and the water content to get the porosity, the void ratio, the degree of saturation and the air-filled porosity.

Updated on
Your inputs

Value out of range

Value out of range

%

Value out of range

Results

Porosity

39.6%

Void ratio
0.656
Volumetric water content
24.0%
Degree of saturation
60.6%
Within the pore space
Air-filled porosity
15.6%

Soil and rock are made of solid grains and empty spaces, and the share of those spaces controls how much water and air they hold. This porosity and void ratio calculator takes the dry bulk density, the grain density and the water content to give the porosity, the void ratio, the volumetric water content, the degree of saturation and the air-filled porosity.

How the calculation works

  • Porosity n = 1 − ρb ÷ ρs, where ρb is the dry bulk density and ρs the density of the solid grains. It is the share of the volume that is empty space.
  • Void ratio e = n ÷ (1 − n) = ρs ÷ ρb − 1. It compares the volume of voids with the volume of solids and is the usual measure in soil mechanics.
  • Volumetric water content θ = water content by weight × ρb ÷ ρw, with the density of water taken as 1 g/cm³.
  • Degree of saturation S = θ ÷ n. At 100% all voids are full of water, and the air-filled porosity is n − θ.

Example

A soil has a dry bulk density of 1.60 g/cm³, a grain density of 2.65 g/cm³ and a water content of 15% by weight. The porosity is 1 − 1.60 ÷ 2.65 = 39.6% and the void ratio is 2.65 ÷ 1.60 − 1 = 0.656. The volumetric water content is 0.15 × 1.60 = 24.0%, the degree of saturation is 60.6%, and the air-filled porosity is 15.6%.

Why it matters

Geotechnical engineers, hydrologists, gardeners and students use the figures to study compaction, drainage, water storage and settlement. The void ratio is the base of many soil mechanics formulas, and the porosity helps to estimate how much water a layer can hold.

Good to know

The calculation assumes that the grain density is the same throughout and that the dry bulk density is measured on an undisturbed sample. Real soils have grains of different minerals, closed pores, and organic matter that change the grain density. Water content is taken against dry weight and the density of water is 1 g/cm³. The result describes total porosity, and not the effective porosity that is connected and can drain, which is often smaller.

Darcy’s law calculator turns porosity and pressure into a flow, the density calculator links mass and volume and the potting soil calculator helps with growing mixes.

Frequently asked questions

What is the difference between porosity and void ratio?

Porosity is the volume of voids divided by the total volume, a number between 0 and 1. The void ratio is the volume of voids divided by the volume of solids and can be greater than 1 for loose or organic soils. They carry the same information and convert with e = n ÷ (1 − n).

What grain density should I use?

Most mineral soils have a grain density of about 2.60 to 2.75 g/cm³, and 2.65 is the usual value for quartz sand and many soils. Organic soils and peat are much lower, and soils rich in iron minerals are higher. A laboratory test with a pycnometer gives the exact value.

What are typical porosity values?

Gravel and clean sand often have a porosity of 25 to 45%, silt about 35 to 50% and clay 40 to 70%. Compacted soils and rock have lower porosity than loose soils. Porosity tells the amount of water that can be stored, and not how easily it moves, which is the job of permeability.

Why does the degree of saturation matter?

It shows how much of the pore space is filled with water. A fully saturated soil has lost most of its strength and has no room for more water, while a dry soil has high suction and a dry unit weight. Foundation, drainage and irrigation designs all depend on it.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.