Skip to content
Omnikalc

Storm-relative helicity (SRH) calculator

Enter the wind at the surface, 1, 2 and 3 km and the motion of the storm to get the storm-relative helicity of the layers and its supercell potential.

Updated on
Your inputs
kt

Value out of range

°

Value out of range

kt

Value out of range

°

Value out of range

kt

Value out of range

°

Value out of range

kt

Value out of range

°

Value out of range

kt

Value out of range

°

Value out of range

Results

SRH 0–1 km

103 m²/s²

SRH 0–3 km

216 m²/s²

Bulk wind difference 0–3 km
21.7 m/s
Class of the 0–3 km SRH (0 under 150, 1 from 150, 2 from 300)
1
Class of the 0–1 km SRH (0 under 100, 1 from 100, 2 from 200)
1
Storm motion east component (u)
12.6 m/s

The storm-relative helicity calculator gives the SRH over 0–1 km and 0–3 km, the bulk wind difference over 0–3 km, the classes of both SRH values and the storm motion components, from the wind at four heights and the motion of a storm.

How the calculation works

  • Enter the wind speed and direction at the surface, 1, 2 and 3 km, where the direction is the one the wind blows from.
  • Enter the speed and direction of the storm motion.
  • Read the SRH values and compare them with 150 and 300 over 0–3 km, 100 and 200 over 0–1 km.

Example

For the entered profile and a storm moving at 27 kt from 245 °, the SRH is 103 m²/s² over 0–1 km and 216 m²/s² over 0–3 km. The wind changes by 21.7 m/s between the surface and 3 km. The classes are 1 and 1.

Why it matters

The calculator helps students of meteorology, storm spotters and forecasters in training to see how the turning of the wind and the motion of a storm set the helicity, which is a key ingredient of supercells and tornadoes.

Good to know

Four levels are a coarse description of a wind profile, which real analyses compute from many levels at a resolution of a few hundred metres, so the result is an estimate. The sign convention gives positive values for winds that veer with height in the Northern Hemisphere, with right-moving storms. The speed units are knots for English and metres per second for French, and the result is always in m²/s². Helicity is only one ingredient: a storm also needs instability, moisture and a trigger. Follow official forecasts and warnings.

The Total Totals calculator gives stability indices, the SWEAT index calculator combines them with winds, the wind shear power law calculator extrapolates winds with height and the lightning distance calculator estimates the distance of a flash.

Frequently asked questions

What is storm-relative helicity?

Helicity measures the potential for rotation of air entering a storm. The storm-relative helicity (SRH) integrates the turning of the wind with height, weighted by the speed of the wind relative to the storm. A large positive value means winds that veer strongly with height and feed a rotating updraft, as in supercells.

How is it calculated here?

The calculator converts each wind to components (u, v), subtracts the storm motion and sums, over each layer, (u₂ − cx)(v₁ − cy) − (u₁ − cx)(v₂ − cy). This is the discrete form of the integral of the wind shear crossed with the storm-relative wind. Four levels give three layers, so the profile is coarse.

What values matter?

An SRH of 150 m²/s² or more over 0–3 km favors supercells, and over 300 strong ones. For 0–1 km, values above 100 m²/s² are associated with a higher risk of tornadoes, and above 200 with significant tornadoes. These are guides from observed storm environments, not thresholds that guarantee an event.

How is the storm motion chosen?

It matters a lot. Forecasters estimate it from the observed motion of a storm, or from the mean wind and a deviation of about 7.5 m/s to the right for right-moving supercells, such as the Bunkers method. In this calculator you enter the motion, so test several values.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.