Skip to content
Omnikalc

Rocket nozzle exhaust velocity and thrust calculator

Enter the chamber pressure and temperature, the exit pressure, the gas properties and the mass flow to get the exhaust velocity, the specific impulse and the thrust.

Updated on
Your inputs
bar

Value out of range

bar

Value out of range

bar

Value out of range

K

Value out of range

Value out of range

g/mol

Value out of range

kg/s

Value out of range

cm²

Value out of range

Results

Exhaust velocity

2,838 m/s

Specific impulse at the nozzle exit pressure
289 s
Temperature of the gas at the exit
1,724 K
Mach number at the exit
3.21
Thrust
14,188 N
Pressure part of the thrust
-2 N

The rocket nozzle calculator gives the exhaust velocity, the specific impulse, the exit temperature and Mach number, the thrust and the pressure part of the thrust of an ideal nozzle from the chamber and exit conditions.

How the calculation works

  • Enter the chamber pressure and temperature, and the exit pressure of the nozzle.
  • Enter the ambient pressure, the heat capacity ratio and the molar mass of the exhaust gas.
  • Enter the propellant mass flow and the exit area to get the thrust.

Example

A chamber at 70 bar and 3500 K that expands to 1 bar gives an exhaust velocity of 2,838 m/s, a specific impulse of 289 s and an exit Mach number of 3.21 at 1,724 K. With 5 kg/s of propellant flow, the thrust is 14,188 N, of which -2 N comes from the pressure term.

Why it matters

The calculator helps students, rocket hobbyists and engineers who estimate the performance of a nozzle, compare propellants or understand why altitude and expansion change the thrust.

Good to know

Take the chamber temperature, γ and the molar mass from a thermochemical program for your propellant: the values change with the mixture ratio and the pressure. A solid rocket has a molar mass of 22 to 28 g/mol and a γ of 1.15 to 1.25, a kerosene and oxygen engine about 22 g/mol, and a hydrogen and oxygen engine about 13 g/mol. The ideal exhaust velocity is higher than the real value by a few percent, and the thrust coefficient depends on the nozzle shape. Check the pressure at the exit against the ambient, since a large mismatch causes flow separation inside the nozzle.

The isentropic flow calculator gives the properties at a given Mach number, the specific impulse calculator rates a motor from thrust and flow, the rocket equation calculator turns the exhaust velocity into a velocity change and the thrust-to-weight calculator checks the lift-off.

Frequently asked questions

How is the exhaust velocity of a rocket calculated?

For an ideal gas that expands isentropically in a nozzle, the exit velocity is ve = √(2γ / (γ − 1) × R × Tc / M × [1 − (pe / pc)^((γ − 1) / γ)]), where γ is the heat capacity ratio, R the gas constant, M the molar mass, Tc the chamber temperature and pe / pc the pressure ratio. For 70 bar, 3 500 K, γ = 1.2 and M = 22 g/mol, expanding to 1 bar, the velocity is about 2 850 m/s.

What are the main factors that raise the velocity?

A higher chamber temperature, a lower molar mass of the exhaust, a higher chamber pressure and a lower exit pressure all increase the exhaust velocity. This is why hydrogen engines, with a molar mass near 10 g/mol, reach 4 400 m/s in a vacuum, while solid rockets are near 2 500 m/s. The gain from the pressure ratio flattens out at high expansion.

How is the thrust calculated?

The thrust is the momentum thrust, the mass flow times the exhaust velocity, plus a pressure term (pe − pa) × Ae for the exit area Ae. When the nozzle is matched, pe equals the ambient pressure and the pressure term is zero. A nozzle that is over-expanded has pe below pa and loses thrust, while an under-expanded one wastes potential.

How accurate is the result?

It is an ideal estimate. The real gases have properties that change with the temperature, and there are losses from friction, heat loss and the angle of the exhaust. The measured values are typically 90 to 98 % of the ideal velocity. The calculator is meant for learning and for first design estimates.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.