Skip to content
Omnikalc

View factor calculator: how much of the radiation of one disc reaches another?

Enter the radii of two coaxial parallel discs and the distance between them to get the view factors F12 and F21 and the net radiation for black surfaces.

Updated on
Your inputs
in

Value out of range

in

Value out of range

in

Value out of range

°F

Value out of range

°F

Value out of range

Results

View factor F₁₂

0.3249

View factor F₂₁
0.1444
Net radiation from disc 1 to disc 2 (black surfaces)
145.7 BTU/h

Radiation leaving a surface is not all caught by another one. The view factor calculator finds the fraction that arrives from the first coaxial disc to the second, from the radii and the distance. It also gives the reverse factor F₂₁ by reciprocity and the net radiation for black surfaces from the temperatures.

How the calculation works

  • Enter the radius of each disc, the distance between them along the common axis and, if you want the heat flow, the two temperatures.
  • The calculator takes R₁ = r₁/L, R₂ = r₂/L and S = 1 + (1 + R₂²) / R₁².
  • The view factor from disc 1 to disc 2 is F₁₂ = ½ [S − √(S² − 4 (r₂/r₁)²)], the share of the radiation of disc 1 that reaches disc 2.
  • The reciprocity rule A₁F₁₂ = A₂F₂₁ gives F₂₁, and the net exchange for black surfaces is Q = σ A₁ F₁₂ (T₁⁴ − T₂⁴).

Example

Two parallel discs of radii 4 in and 6 in face each other at a distance of 8 in. The view factor F₁₂ is 0.325, and F₂₁ is 0.144. With disc 1 at 500 °F and disc 2 at 100 °F, and with both taken as black surfaces, the net radiation is 42.7 W, which is 146 BTU/h.

Why it matters

View factors are the geometric part of every radiation heat transfer calculation: furnaces, radiant heaters, cooling of spacecraft, solar collectors, fire safety, ovens and the thermal design of lamps and electronics. Parallel coaxial discs are a standard case that has a closed-form solution and is used to check software.

Good to know

The calculator applies the exact formula for two directly opposed, coaxial, parallel discs in a transparent medium, with uniform radiosity on each. Surfaces that are not black, with an emissivity below 1, exchange less heat, and reflections from other surfaces are not included. The net radiation shown is for black surfaces and so is an upper bound on real surfaces. Misaligned or tilted discs need other formulas.

The radiative heat exchange calculator adds the emissivities and the shields, the blackbody radiation calculator covers the Stefan–Boltzmann law for one surface, the heat loss calculator covers the total loss, and the natural convection calculator covers the other mode of transfer from a hot surface.

Frequently asked questions

What is a view factor?

It is the fraction of the radiation that leaves one surface and arrives directly at another. It depends only on geometry (the sizes, the shapes and the relative positions), not on the temperatures or the materials. It is also called the shape factor, the configuration factor or the angle factor, and it is a number between 0 and 1.

What is the reciprocity rule?

The areas and the view factors of two surfaces are linked by A₁ F₁₂ = A₂ F₂₁. This allows finding one factor when the other is known. In the example, the larger disc sees the smaller one over a smaller share of its view, so F₂₁ is smaller than F₁₂.

What are the limits of the factor?

As the distance goes to zero between two equal discs, F₁₂ goes to 1: all the radiation of one reaches the other. As the distance grows, the factor falls with the square of the distance, as F₁₂ ≈ (r₂ / L)²/ (1 + ...) for a small target. If one disc is much larger than the other and close, the small disc sees the large one almost entirely (F₂₁ near 1).

How is it used for heat transfer?

In the net radiation between gray surfaces, the view factor enters the resistance of space between them, 1 / (A₁ F₁₂). Combined with the surface resistances of emissivity, it gives the heat transfer in enclosures, furnaces, heaters, solar collectors and the radiation of electronic components. For black surfaces, as here, only the view factor matters.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.