Skip to content
Omnikalc

Bridge girder live load distribution factor calculator (AASHTO LRFD)

Enter the girder spacing, the span, the slab thickness and Kg to get the AASHTO distribution factors for one and for two lanes and the live load moment per girder.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

in

Value out of range

in⁴

Value out of range

kip-ft

Value out of range

Results

Governing distribution factor

0.704

Factor for one lane
0.509
Factor for two or more lanes
0.704
Live load moment on one girder
986 kip-ft
Range of applicability
1
Inside the range of applicability of the formulas

The bridge girder distribution factor calculator gives the AASHTO LRFD moment distribution factors of an interior girder for one lane and for two or more lanes, the governing factor and the live load moment on one girder, from the spacing, the span, the slab thickness and Kg.

How the calculation works

  • Enter the girder spacing, the span, the deck slab thickness and the stiffness parameter Kg.
  • Choose whether one lane or two or more lanes are loaded, and enter the moment of one lane of live load.
  • The calculator gives the distribution factors, the governing factor and the live load moment on one girder.

Example

A bridge with girders at 8 ft, a span of 70 ft, a deck slab of 8 in and Kg = 900,000 in⁴ has a factor Kg / (12 L ts³) = 2.09. For one lane the factor is 0.06 + (8 / 14)^0.4 × (8 / 70)^0.3 × 2.09^0.1 = 0.509. For two lanes it is 0.075 + (8 / 9.5)^0.6 × (8 / 70)^0.2 × 2.09^0.1 = 0.704, which governs. With a lane moment of 1,400 kip-ft the girder carries 0.704 × 1,400 = 986 kip-ft.

Why it matters

The calculator helps bridge engineers, designers and students to get the live load share of a girder at the start of a design, to see how the spacing and the span change it, and to check the range of the equations.

Good to know

Check the conditions of the equations before you use them, and use the lever rule for the exterior girders and the shear. Remember that the factor of one lane includes the multiple presence factor of 1.2, so it cannot be divided by it again. Use the stiffness of the composite girder with the modular ratio, and use the moment of the lane from an analysis of the span.

The two-span continuous beam calculator gives the moments of a continuous span, the beam deflection calculator gives the deflection, the elastomeric bearing pad calculator checks the bearing and the bridge expansion joint calculator gives the thermal movement.

Frequently asked questions

What is a distribution factor?

A bridge deck spreads the wheel loads of the vehicles over several girders. The distribution factor g is the share of one design lane of live load that a girder carries. The moment in a girder is the moment of one lane on the span, with the dynamic allowance, times g. The AASHTO LRFD Bridge Design Specifications give simple equations of g for the usual types of decks, as a function of the spacing, the span, the slab thickness and the stiffness of the girder.

What are the equations?

For an interior girder of a concrete deck on steel or concrete girders, the moment factor for one lane is g = 0.06 + (S / 14)^0.4 (S / L)^0.3 (Kg / 12 L ts³)^0.1, and for two or more lanes g = 0.075 + (S / 9.5)^0.6 (S / L)^0.2 (Kg / 12 L ts³)^0.1, with S in feet, L in feet, ts in inches and Kg in in⁴. They include the multiple presence factor. The factor that governs is the larger of the two for a bridge with two or more lanes.

What is Kg?

The longitudinal stiffness parameter is Kg = n (I + A eg²), with n the ratio of the moduli of the girder and the deck, I and A the inertia and the area of the girder alone, and eg the distance between the centers of gravity of the girder and of the deck. It measures how much stiffer the girder is than the slab, and a stiffer girder takes a larger share of the load. Use a first value to start the design, and update it when the girder is chosen.

What does the calculator leave out?

The equations are valid for 3.5 ≤ S ≤ 16 ft, 20 ≤ L ≤ 240 ft, 4.5 ≤ ts ≤ 12 in and at least four girders, and the calculator tells you if you are outside. It gives the factor for the moment of an interior girder only, and not for the shear, the exterior girders, the skew or the curved bridges, which have other equations or the lever rule. It also does not compute the lane moment, which depends on the HL-93 loading and the span.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.