Skip to content
Omnikalc

Crane hoist reeving line pull and parts of line calculator

Enter the load, the parts of line, the sheave friction, the sheaves to the drum, the hook speed and the design factor to get the line pull, the rope breaking force, the line speed and the power.

Updated on
Your inputs
tons

Value out of range

Value out of range

Value out of range

Value out of range

ft/min

Value out of range

Value out of range

Value out of range

Results

Line pull at the drum

4.13 tons

Minimum breaking force of the rope
20.6 tons
Line speed
180 ft/min
Power at the drum
53.0 hp

The crane hoist reeving line pull and parts of line calculator gives the line pull at the drum, the minimum breaking force of the rope, the line speed and the power at the drum for a hoist with several parts of line, from the load, the sheave friction and the speed of the hook.

How the calculation works

  • Enter the load on the hook, the parts of line and the friction factor of the sheaves.
  • Enter the number of sheaves between the block and the drum, the hook speed, the efficiency and the design factor.
  • The calculator finds the line pull, the minimum breaking force of the rope, the line speed and the power.

Example

A load of 20 tons is lifted with 6 parts of line, a friction factor of 1.04 and 8 sheaves before the drum. The line pull is 20 × 1.04^8 × 0.04 / (1.04^6 − 1) = 4.13 tons. With a design factor of 5, the rope needs a breaking force of 20.6 tons. At 30 ft/min of hook speed, the line speed is 180 ft/min, and the power at the drum is 53.0 hp with an efficiency of 0.85.

Why it matters

The calculator helps crane operators, riggers, equipment engineers and students to choose the number of parts of line for a load, to see the effect of the sheave friction, and to find the size of the rope and the power of the winch.

Good to know

Use the number of parts of line shown in the load chart of the crane, and reeve the rope as the manufacturer says. Keep the sheaves greased and the rope lubricated, and check the sheave grooves for wear. Replace the rope according to the standard, and do not exceed the rated line pull of the hoist.

The wire rope capacity calculator gives the breaking force and the working load of a rope, the sling angle calculator gives the tension in the slings, the winch size calculator gives the line pull of a winch and the tower crane calculator checks the load moment of a lift.

Frequently asked questions

What are the parts of line?

The parts of line are the number of rope segments which support the load block. A rope that runs several times between the fixed block at the boom tip and the load block gives a mechanical advantage: the line pull at the drum is smaller than the load, and the hook moves more slowly than the rope. With 6 parts of line, the pull is about one sixth of the load and the hook speed is one sixth of the line speed.

Why is the line pull more than the load divided by the parts?

The sheaves have friction, and the rope bends over them, so the line pull has to be larger than the simple division. The friction factor K of a sheave is about 1.04 for a roller bearing and 1.09 for a bronze bushing. The formula uses this factor for each sheave from the block to the drum, so a long reeving with many sheaves needs a larger pull.

How is the rope selected?

The rope is chosen so that its minimum breaking force is at least the line pull times a design factor, which is often 5 for a mobile crane hoist and can be higher for other uses. The standards give the design factor for each type of equipment. The rope must also be of the right construction and diameter for the sheaves and for the drum, and be rotation-resistant if the lift is high.

What are the limits of the calculator?

The calculator gives a first estimate with a constant friction factor and a static load. It does not take into account the acceleration of the load, the fleet angle on the drum, the layers of the rope on the drum, the wear of the rope and of the sheaves or the dynamic factors. The real values must come from the manufacturer of the crane or the hoist.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.