Skip to content
Omnikalc

Earthwork overhaul and haul cost calculator

Enter the volume, the average haul distance, the free haul distance and the unit prices to get the overhaul quantity in station-yards and the total haul cost.

Updated on
Your inputs
yd³

Value out of range

ft

Value out of range

ft

Value out of range

$/yd³

Value out of range

$ per station-yd³

Value out of range

Results

Total cost

106,200 $

Overhaul distance
950 ft
Overhaul quantity
171,000 station-yd³
Overhaul cost
34,200 $
Excavation and free haul cost
72,000 $
Average cost per cubic yard
5.90 $/yd³

The earthwork overhaul calculator gives the overhaul distance beyond the free haul, the overhaul quantity in station-yards, the overhaul cost, the cost of the excavation with the free haul and the average cost per cubic yard.

How the calculation works

  • Enter the volume hauled, the average haul distance from the center of the cut to the center of the fill, and the free haul distance.
  • Enter the unit price of excavation with the free haul and the unit price of overhaul per station-yard.
  • The calculator gives the overhaul distance, the overhaul quantity, the costs and the average cost per cubic yard.

Example

18,000 yd³ are hauled over an average distance of 1,450 ft with a free haul of 500 ft. The overhaul distance is 950 ft, that is 9.5 stations, so the overhaul is 18,000 × 9.5 = 171,000 station-yd³. At $0.20 per station-yard it costs $34,200. The excavation with the free haul at $4.00/yd³ costs $72,000. The total is $106,200, an average of $5.90/yd³.

Why it matters

The calculator helps estimators, civil engineers, earthwork contractors and inspectors to price the haul of a cut to a fill, to check an overhaul quantity of a pay item, and to see how much the free haul distance changes the cost.

Good to know

Check the definition of the free haul and of the station-yard in the specification, since some contracts use a free haul of 1,000 ft or measure the haul along the haul road and not along the straight line. Use the volume as the contract measures it, in bank yards or in compacted yards. Compare the overhaul with the cost of a nearby borrow pit and a waste site, since it can be cheaper than a long haul.

The earthwork swell and shrink calculator converts the volumes of soil, the haul truck rimpull calculator checks the grade a truck can climb, the scraper cycle production calculator gives the production of scrapers and the dump truck loads calculator gives the loads to haul a volume.

Frequently asked questions

What is overhaul?

Overhaul is the extra payment for hauling the excavated material farther than the free haul distance. The contract pays the excavation at a unit price that includes a haul up to the free haul distance, often 500 or 1,000 ft, and pays the beyond at a price per station-yard. A station is 100 ft, so a yard of soil hauled 100 ft beyond the free haul is one station-yard of overhaul.

How is the average haul distance found?

On a mass haul diagram, the haul distance of a balanced section is the distance between the centers of gravity of the cut and of the fill, and the diagram shows it as the length of a horizontal line between two points of the curve. For a quick estimate the calculator takes this average distance as an input. For several balanced sections, run the calculator for each and add the results.

Why does the overhaul price differ from a truck cost?

The overhaul price per station-yard is a contract rate and it often does not follow the real cost of the trucks, which depends on the cycle time, the grade and the haul road. For a hauling by trucks the real cost is better found from the hourly cost of the trucks and the productivity. The calculator is meant for a quantity take-off and a check of the contract overhaul.

What does the calculator leave out?

The calculator does not consider the swell and shrink of the soil, the borrow and waste, the different materials, or the sections that are hauled in both directions. It also assumes that the volume is a bank or a compacted volume as the contract says. Use a mass haul diagram or an earthwork software to balance a whole project and find the sections.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.