The hydroseeding slurry quantity calculator gives the seed, the mulch and the bales, the tackifier, the water for the slurry and the number of tank loads of a hydroseeding job, from the area, the rates per acre and the capacity of the hydroseeder.
How the calculation works
- Enter the area to seed and the rates of seed, mulch and tackifier per acre.
- Enter the slurry volume per acre, the tank capacity of the hydroseeder and the weight of a mulch bale.
- The calculator finds the seed, the mulch and the bales, the tackifier, the water and the tank loads.
Example
A slope of 2.5 acres is hydroseeded with 60 lb/acre of seed, 2,000 lb/acre of mulch and 80 lb/acre of tackifier. The job needs 150 lb of seed, 5,000 lb of mulch (100 bales of 50 lb) and 200 lb of tackifier. With 3,000 gal/acre of slurry, the water is 7,500 gal, which makes 3 tank loads of a 3,000 gal hydroseeder.
Why it matters
The calculator helps erosion control contractors, landscapers, site managers and students to order the right quantities of seed, mulch and tackifier for a slope or a lawn, to plan the number of tank loads of the day, and to compare several rates or mixes.
Good to know
Prepare the soil, with a rough surface and the fertilizer or the lime that the soil test requires, before the hydroseeding. Mix the slurry in the order given by the manufacturer, usually water, seed, fertilizer and then mulch, and spray it in a uniform layer from two directions. Keep the surface moist until the grass has emerged, and avoid the seeding on frozen or dry ground. Seed in the best season for the species, in the spring or in the early fall.
Related tools
The silt fence posts and fabric quantity calculator estimates the sediment barrier, the soil loss USLE calculator gives the erosion of the slope, the swale calculator sizes a vegetated channel and the riprap calculator gives the stone for a protected slope.