The Kozeny–Carman permeability calculator gives the intrinsic permeability in darcies, the hydraulic conductivity, the Darcy and pore velocities for a gradient, the specific surface of the bed and the particle Reynolds number.
How the calculation works
- Enter the mean grain diameter and the porosity of the bed.
- Enter the sphericity of the grains, 1 for spheres, and the viscosity of the fluid.
- Enter the hydraulic gradient to get the flow velocities.
Example
A bed of grains of 0.5 mm with a porosity of 0.4 has a permeability of 250.2 darcy and a hydraulic conductivity of 685.214 ft/day. At a gradient of 0.1, the Darcy velocity is 68.52 ft/day and the pore velocity 171.30 ft/day. The specific surface is 2,195 ft²/ft³, and the particle Reynolds number is 0.201.
Why it matters
The calculator helps geotechnical, hydrogeology and chemical engineering students and practitioners who estimate the permeability of filter sand, drainage layers, sand columns or packed beds from the grain size, before running a permeability test or selecting a filter media.
Good to know
Use the effective mean grain diameter in millimeters, a porosity between 0.15 and 0.7 and a sphericity of 1 for round grains and lower for angular ones. The hydraulic conductivity is for water, using a unit weight of 9.79 kilonewtons per cubic meter, and the viscosity input lets you adjust for temperature. The equation is a good estimate for clean sands but it is only approximate for silts, clays and broadly graded soils, where laboratory or field tests are better. Verify that the Reynolds number is low.
Related tools
The Darcy’s law calculator gives the flow through a soil, the Ergun pressure drop calculator handles faster flows through packed beds, the soil gradation calculator describes the grain size distribution and the piping safety factor calculator checks seepage stability.