Skip to content
Omnikalc

Motor grader production calculator: time and area graded per hour

Enter the blade length, the speed, the number of passes, the efficiency and the size of the road to get the lanes, the pass length, the time in hours and days and the area per hour.

Updated on
Your inputs
ft

Value out of range

mph

Value out of range

Value out of range

Value out of range

mi

Value out of range

ft

Value out of range

h

Value out of range

Results

Grading time

10.7 h

Lanes of the blade across the width
3
Pass length to travel
24 mi
Working days
1.33 days
Net area graded per hour
29,700 ft²/h

The motor grader blading production calculator gives the lanes of the blade across the width, the pass length, the grading time, the working days and the net area graded per hour, from the blade length, the speed, the number of passes and the efficiency.

How the calculation works

  • Enter the effective blade length, the grading speed, the number of passes and the job efficiency.
  • Enter the length and the width of the road to grade and the working hours per day.
  • The calculator finds the lanes of the blade across the width, the pass length, the time, the days and the net area per hour.

Example

A grader has an effective blade of 10 ft and works at 3 mph with an efficiency of 0.75. A road 2 mi long and 24 ft wide needs ceil(24 / 10) = 3 lanes, and with 4 passes the grader travels 2 × 4 × 3 = 24 mi. At 3 × 0.75 = 2.25 mi/h, this takes 24 / 2.25 = 10.7 h, or 1.33 days of 8 h. The net area graded is 3 × 5,280 × 0.75 × 10 / 4 = 29,700 ft²/h.

Why it matters

The calculator helps earthwork contractors, road crews, estimators and students to plan the time of a grader on a road or a pad, to compare several numbers of passes or speeds, and to see how the width of the work changes the number of lanes and the time.

Good to know

Use the effective blade length after the overlap, and take the speed of the real passes, not the speed of the machine in the transport. Keep the passes straight and long to reduce the time lost in the turns, and add the passes of the final trim if the tolerance is tight. Check the grade with a string or with the machine control, and add a margin on the time for the wet weather.

The dozer production blade calculator gives the production of a dozer, the compaction roller production calculator sizes the compaction behind the grader, the earthwork swell and shrink calculator gives the volume of the earth and the soil compaction calculator checks the density of the fill.

Frequently asked questions

What does a motor grader do?

A motor grader is a machine with a long blade between the front and the rear axles. It is used to shape and level the surface of a road, a parking area or a building pad, to spread and mix the gravel, to cut the ditches and to give the crown and the slope. It makes the final surface before the compaction and the paving.

How is the number of lanes found?

The grader cannot cover the full width with one pass, so the width is divided by the effective blade length and rounded up to the next whole number. The effective blade length is the length of the blade at its working angle, less the overlap between two lanes, which is about 2 ft or 0.6 m. A blade of 12 ft set at an angle gives an effective length of about 10 ft.

What is the job efficiency?

The job efficiency is the part of the time that the grader really works. It takes into account the turns at the end of each pass, the stops, the waiting for the trucks, the checks of the grade and the breaks. A value of 0.75 is common for a 50 minute hour, and a lower value is better for short passes or a site with many obstacles.

What are the limits of the calculator?

The calculator gives the time for the passes at a constant speed. It does not include the time to bring the machine to the site, the difference of the speed between the passes, because the first passes are often slow in a rough material, the time to wait for the water truck or the roller, or the delays caused by rain. Add a margin to the time of the calculation for the planning of the job.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.