Skip to content
Omnikalc

Passing sight distance on a two-lane highway calculator

Enter the passing speed, the speed difference, the maneuver times and the clearance to get the four distances d1, d2, d3 and d4 and the passing sight distance of a two-lane highway.

Updated on
Your inputs
mph

Value out of range

mph

Value out of range

s

Value out of range

mph/s

Value out of range

s

Value out of range

ft

Value out of range

Results

Passing sight distance

1,957 ft

Distance of the initial maneuver d1
292 ft
Distance in the left lane d2
849 ft
Clearance length d3
250 ft
Distance of the opposing vehicle d4
566 ft

The passing sight distance calculator adds the four distances d1, d2, d3 and d4 of the AASHTO model to give the sight distance needed to pass a slower vehicle on a two-lane highway.

How the calculation works

  • Enter the speed of the passing vehicle, the speed difference with the passed vehicle and the time and acceleration of the initial maneuver.
  • Enter the time in the left lane and the clearance length between the vehicles.
  • The calculator gives the four distances d1, d2, d3 and d4 and the passing sight distance.

Example

A vehicle passes at 55 mph with a speed difference of 12 mph. In the initial maneuver of 4.3 s at 1.5 mph/s, d1 = 1.47 × 4.3 × (55 − 12 + 1.5 × 4.3 / 2) = 292 ft. In the left lane for 10.5 s, d2 = 1.47 × 55 × 10.5 = 849 ft. The clearance d3 is 250 ft, and the opposing vehicle covers d4 = 2/3 d2 = 566 ft. The passing sight distance is 1,957 ft.

Why it matters

The calculator helps highway designers, traffic engineers, surveyors and students to find the sight distance for passing zones, to check the curves and crests of a two-lane road and to see how speed and passing time change the distance.

Good to know

Use the design values of your agency for the times and the acceleration, which change with the speed. The passing speed is usually the design speed or the average running speed of the passing vehicle. A longer time in the left lane, which is common for slow traffic or for trucks, increases the distance by a lot. Compare the result with the sight distance of the crests and curves of the road, using the heights of the eye and of the object of the standard for passing, and mark a no-passing zone where the sight distance is less than the value.

The stopping sight distance calculator gives the shorter distance for a stop, the vertical curve calculator checks the sight distance on a crest, the minimum curve radius calculator gives a horizontal curve for the speed and the work zone taper calculator gives the lengths of the tapers.

Frequently asked questions

What is the passing sight distance?

The passing sight distance is the length of road ahead that a driver must see to pass a slower vehicle on a two-lane road safely, without meeting an oncoming vehicle. It is much longer than the stopping sight distance, and it is used to mark the passing zones and to design the curves of a two-lane highway.

What are the four distances?

The distance d1 is traveled during the perception and the initial acceleration of the maneuver, d2 is traveled while the passing vehicle is in the left lane, d3 is the clearance between the passing and the opposing vehicles at the end, and d4 is the distance traveled by the opposing vehicle during two thirds of the time in the left lane.

What are the assumptions?

The passed vehicle travels at constant speed, the passing vehicle slows down behind it and accelerates in the left lane to a speed that is the speed difference higher, and the opposing vehicle comes at the same speed as the passing vehicle. The values of time and acceleration in the AASHTO tables depend on the design speed.

What does the calculator leave out?

The calculator leaves out the grades, the heights of the eye and of the object in the vertical curves, the lengths of the passing zones in the standards, the effect of trucks and the delay of a driver who changes mind in the maneuver. Use the tables of your agency, the Green Book or the national standard, for the design values.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.