Skip to content
Omnikalc

Pavement crack sealing calculator: sealant quantity, pails and cost

Enter the crack length, the reservoir width and depth, the allowance, the pail size and the price to get the sealant volume, the quantity to order, the pails and the cost.

Updated on
Your inputs
ft

Value out of range

in

Value out of range

in

Value out of range

%

Value out of range

gal

Value out of range

$/gal

Value out of range

Results

Sealant to order with the allowance

53.6 gal

Sealant in the reservoirs
48.7 gal
Pails
11
Material cost
1,071 $

The pavement crack sealing calculator gives the volume of sealant in the reservoirs, the quantity to order, the number of pails and the material cost for the cracks of an asphalt or concrete pavement, from the length of the cracks and the size of the reservoir.

How the calculation works

  • Enter the length of the cracks and the width and the depth of the sealant reservoir.
  • Enter the waste and overfill allowance, the size of a pail and the price of the sealant.
  • The calculator finds the sealant in the reservoirs, the quantity to order, the number of pails and the material cost.

Example

A crack seal job of 5,000 ft uses a reservoir 0.375 in wide and 0.5 in deep, so the volume is 0.375 × 0.5 × 5,000 × 12 / 231 = 48.7 gal. With a 10 % allowance, the order is 53.6 gal, which makes 11 pails of 5 gal. At $20/gal, the material costs $1,071.

Why it matters

The calculator helps public works crews, maintenance contractors, estimators and students to order the right quantity of crack sealant, to compare the cost of several reservoir sizes, and to plan the number of pails and the cost of the material of a maintenance program.

Good to know

Route or saw the cracks to the right size, clean them with compressed air and heat, and place the sealant when the pavement is dry and above the minimum temperature of the product. Do not overfill, tool the sealant flush or slightly below the surface, and keep the traffic off until the sealant has cooled or cured. Do the crack sealing in the cool season, when the cracks are open.

The joint sealant movement and width calculator sizes the sealant of a joint, the asphalt paver production and trucks calculator plans a paving crew, the pavement marking paint quantity calculator estimates the paint and the chip seal aggregate and emulsion rate calculator sizes a surface treatment.

Frequently asked questions

What is crack sealing?

Crack sealing is the repair of the working cracks of a pavement, which open and close with the temperature, by cutting or routing a reservoir along the crack and filling it with a hot-applied or a cold-applied sealant. The sealant keeps the water out of the base and the subgrade and slows the growth of the cracks. It is a low-cost maintenance that extends the life of the pavement.

How is the quantity of sealant found?

The volume of sealant is the section of the reservoir, that is the width times the depth, times the total length of the cracks. With the width and the depth in inches and the length in feet, the volume in cubic inches is divided by 231 to get gallons. In metric, the width and the depth in millimeters and the length in meters give liters after a division by 1,000. An allowance covers the overfill, the waste and the loss in the hoses.

What is a good reservoir size?

The reservoir is made wider and deeper than the crack itself, so that the sealant has a good bond area and can stretch with the movement. A common size is 3/8 in by 1/2 in, or 10 mm by 12 mm, for the cracks of a pavement. The ratio of the width to the depth is often between 1:1 and 1:2, and the sealant is placed slightly below the surface of the pavement to avoid the pick-up by the tires.

What are the limits of the calculator?

The calculator gives the quantity of sealant for a constant reservoir. The real cracks have a width and a path that change, the routing may be wider at some places, and the sealant is also used for the overband. The calculator does not include the backer rod, the cleaning of the crack, the traffic control or the labor. The product must be installed as the manufacturer and the specification say, in dry and warm weather.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.