Skip to content
Omnikalc

Slope stake catch point offset calculator for cut and fill

Enter the cut or fill at the centerline, the width of the road bed, the side slope and the ground slope to get the catch point distance, the cut or fill at the stake and the offset beyond the shoulder.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

Value out of range

%

Value out of range

Results

Distance from the centerline to the catch point

25.00 ft

Cut or fill at the catch point
6.50 ft
Distance beyond the shoulder
13.00 ft
Ground rise from the centerline to the stake
2.50 ft

The slope stake catch point calculator gives the distance of the catch point from the centerline, the cut or fill at the catch point, the distance beyond the shoulder and the rise of the ground to the stake, from the cut or fill at the centerline, the width of the road bed, the side slope and the ground slope.

How the calculation works

  • Enter the cut or fill at the centerline and the width of the road bed or of the ditch bottom.
  • Enter the side slope and the ground slope toward the stake.
  • The calculator finds the distance of the catch point from the centerline, the cut or fill there and the distance beyond the shoulder.

Example

A road bed 24 ft wide has a cut of 4 ft at the centerline, with side slopes of 2 : 1 and a ground that deepens the cut at 10 % toward the stake. The catch point is at (12 + 2 × 4) / (1 − 2 × 0.10) = 25.0 ft from the centerline. The cut there is 4 + 0.10 × 25.0 = 6.5 ft, and the stake is 13.0 ft beyond the shoulder, where the ground has risen by 2.5 ft.

Why it matters

The calculator helps surveyors, grade checkers, road builders, site engineers and students to find where to set the slope stakes of a cut or a fill before they go into the field, to check the notes of the staking, and to see how the ground slope moves the catch point.

Good to know

Set the first stake at the distance given by the calculation and then check it with a level and a rod, because the ground is rarely a perfect plane. Move the stake and repeat until the cut or the fill at the stake matches the distance. Write the notes with the cut or fill and the distance, mark the stake clearly and offset it if the grading machines will remove it.

The grade stake cut and fill calculator gives the cut or the fill at a stake from a level rod, the earthwork swell and shrink calculator converts bank and loose volumes, the motor grader blading production calculator gives the output of a grader and the horizontal curve calculator gives the layout of a road curve.

Frequently asked questions

What is the catch point?

The catch point is the place where the side slope of a cut or a fill meets the natural ground. The surveyor sets a slope stake there, so that the grader operator knows where the earthwork starts. The distance of the catch point from the centerline depends on the width of the road bed, the side slope and the shape of the ground.

Why does the ground slope matter?

When the ground rises toward the stake, a cut gets deeper as you go out, and the catch point moves farther from the centerline. The depth at the catch point is not the depth at the centerline. The formula solves this together: the distance is half the width plus the side slope times the depth at the stake, where the depth itself depends on the distance.

How do I set the sign of the ground slope?

Enter a positive value when the ground makes the cut or the fill deeper toward the stake, that is a ground rising in a cut or falling in a fill. Enter a negative value when the ground makes it shallower. The product of the side slope and the ground slope must stay under 100 %, or the slope never meets the ground.

What are the limits of the calculator?

The calculator assumes a ground with a constant cross slope on the side of the stake and a straight side slope. It does not include the ditches, the benches, the topsoil stripping, the curves with widening or the superelevation. In practice, the surveyor checks the catch point on the ground by trial and error, with a level and a rod, and adjusts the stake.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.