The soil cement and lime stabilization calculator gives the dry soil mass, the additive spread rate, the tons of additive to order and the bulk truck loads for a stabilized subgrade or base, from the area, the depth, the dry unit weight and the additive content.
How the calculation works
- Enter the area to stabilize, the depth of treatment and the dry unit weight of the soil.
- Enter the additive content by dry weight of soil, the loss allowance and the capacity of a bulk truck.
- The calculator finds the dry soil mass per area, the spread rate of the additive, the tons to order and the truck loads.
Example
A soil with a dry unit weight of 105 pcf is treated on 8 in of depth, which is 8 / 12 × 9 × 105 = 630 lb/yd² of dry soil. With 5 % of additive, the spread rate is 31.5 lb/yd². For 10,000 yd² with an 8 % allowance, the order is 31.5 × 10,000 / 2,000 × 1.08 = 170.1 tons, which makes 8 bulk truck loads of 22 tons.
Why it matters
The calculator helps geotechnical engineers, road contractors, estimators and students to convert a lab dosage into a spread rate and a quantity to order, to compare several dosages or depths, and to plan the supply of lime or cement for a stabilization job.
Good to know
Spread the additive evenly, in calm weather and with a calibrated spreader, check the rate with trays or sheets laid on the ground, and mix it at once to the full depth. Add the water for the compaction, compact in the time allowed by the product and cure the layer with water or with an emulsion. Protect the neighbors and the traffic from the dust.
Related tools
The soil compaction calculator checks the density of a fill, the CBR subgrade modulus calculator converts the strength of a subgrade, the compaction roller production calculator sizes the compaction and the earthwork swell and shrink calculator gives the volumes of the soil.