The stabilized construction entrance calculator gives the area of the entrance, the stone to order, the weight of the stone and the geotextile to buy for a construction site access, from the size of the pad, the thickness of the stone and the allowances.
How the calculation works
- Enter the length, the width and the thickness of the stone of the entrance.
- Enter the stone density, the waste allowance and the geotextile allowance.
- The calculator finds the area, the stone to order, its weight and the geotextile to buy.
Example
An entrance 50 ft long and 20 ft wide has an area of 1,000 ft², or 111.1 yd². With 8 in of stone and a 10 % allowance, the stone is 1,000 × 8 / 12 / 27 × 1.10 = 27.2 yd³, or 38.0 tons at 1.4 tons/yd³. The geotextile with a 10 % allowance is 111.1 × 1.10 = 122.2 yd².
Why it matters
The calculator helps site managers, erosion control contractors, estimators and students to order the stone and the geotextile for the entrance of a construction site, to see how the size and the thickness change the quantities, and to plan the delivery of the stone before the earthwork begins.
Good to know
Build the entrance before any other work, at the place where the trucks really leave the site, and direct all the traffic over it. Use a clean stone with large voids, and place it on a geotextile on a graded ground that drains toward a sediment control. Add stone when the voids are full of mud, and sweep the road at the end of each day. Keep a pile of clean stone and a broom on site, so that the entrance can be repaired the same day when it is needed.
Related tools
The dust control water truck demand calculator plans the water for the site roads, the silt fence posts and fabric quantity calculator estimates a sediment barrier, the riprap calculator gives the stone of a protected slope and the geotextile filter calculator checks the fabric of a drain.