The street gutter flow calculator gives the flow, the depth at the curb, the velocity and the depth as a share of the curb height of a triangular gutter, from the width of the spread, the cross slope, the street slope and the Manning roughness.
How the calculation works
- Enter the width of the spread of the water from the curb and the cross slope of the pavement.
- Enter the longitudinal slope of the street, the Manning roughness of the pavement and the height of the curb.
- The calculator finds the flow in the gutter, the depth at the curb, the velocity and the depth as a share of the curb height.
Example
A gutter has a spread of 8 ft, a cross slope of 2 %, a longitudinal slope of 1.5 % and n = 0.016. The flow is 0.56 / 0.016 × 0.015^0.5 × 0.02^(5/3) × 8^(8/3) = 1.62 cfs. The depth at the curb is 8 × 0.02 × 12 = 1.92 in. The flow area is 0.5 × 8² × 0.02 = 0.64 ft², so the velocity is 2.53 ft/s. For a curb of 6 in, the depth is 0.32 of the curb height.
Why it matters
The calculator helps drainage engineers, road designers, site developers and students to check the capacity of a street before the inlets, to find the spacing of the storm drain inlets and to see how the slope and the spread change the flow.
Good to know
Check the gutter at the steepest and at the flattest part of the street, and at the low points where the water accumulates. Use the spread allowed by the road authority for the storm of the design, and put the inlets before the spread reaches the limit. Keep a margin below the top of the curb, because the debris and the roughness reduce the capacity.
Related tools
The curb opening inlet capacity calculator sizes an inlet in the curb, the grate inlet capacity calculator sizes a grate, the Manning equation calculator relates the flow, the slope and the section and the permeable pavement reservoir depth calculator handles the storage.