The two-way stop capacity calculator gives the potential capacity of a minor road movement from the gap acceptance model, with the v/c ratio and the control delay and its level of service.
How the calculation works
- Enter the conflicting traffic on the major road, the critical headway of the minor movement and the follow-up headway.
- Enter the volume of the minor movement and the analysis period.
- The calculator gives the potential capacity, the v/c ratio, the service time and the control delay with its level of service.
Example
A driver turns left from a minor road onto a major road with 600 veh/h of conflicting traffic, a critical headway of 7.1 s and a follow-up headway of 3.5 s. The potential capacity is c = v e^(−v tc / 3600) / (1 − e^(−v tf / 3600)) = 416 veh/h. A volume of 120 veh/h gives v/c = 0.289, a service time of 8.7 s and a control delay of 17.1 s, which is level of service C.
Why it matters
The calculator helps traffic engineers, planners, developers and students to check a side street or a driveway that enters a busy road, to see when the delay becomes too long, and to decide if a signal, a roundabout or a turn lane is needed.
Good to know
Use the conflicting flow of the major road in the lanes that the minor movement must cross or merge with, including the movements of the other directions as the HCM says. The critical headway is 7.1 s for a left turn, 6.5 s for crossing and 6.2 s for a right turn in the basic table, and higher for multilane roads. Use the peak 15-minute volume. If the delay is level of service E or F, look at the options, such as a left-turn lane on the major road, a median refuge, a signal, a roundabout or a restriction of the left turns.
Related tools
The traffic signal cycle length calculator times a signal, the roundabout capacity calculator checks an alternative, the stopping sight distance calculator gives the distance to stop on the major road and the queue wait time calculator gives the wait in a line.