Skip to content
Omnikalc

Capillary number calculator

Enter the viscosity, the velocity and the surface tension to get the capillary number, the flow regime and the liquid film left behind a bubble.

Updated on
Your inputs
cP

Value out of range

in/s

Value out of range

dyn/cm

Value out of range

in

Value out of range

Results

Capillary number Ca = μv/γ

0.000353

Bretherton film thickness

133.8 µin

Regime (0 surface tension dominates, 1 mixed, 2 viscosity dominates)
0
Film thickness as a share of the tube radius
0.669 %
Velocity at which Ca = 0.001
2.83 in/s
Capillary velocity γ/μ (Ca = 1)
2,835 in/s

The capillary number calculator gives the capillary number, the flow regime, the Bretherton film thickness left behind a bubble in a tube, the film as a share of the radius and the velocities at which Ca equals 0.001 and 1.

How the calculation works

  • Enter the dynamic viscosity in centipoise and the characteristic velocity.
  • Enter the surface tension of the liquid against the gas or the other liquid.
  • Enter the tube radius to get the film thickness.

Example

A liquid of 1 cP moving at 1 in/s with a surface tension of 72 dyn/cm has a capillary number of 0.000353, regime 0. In a tube of radius 0.02 in, the Bretherton film is 133.8 µin thick, 0.669 % of the radius. Ca reaches 0.001 at 2.83 in/s, and the capillary velocity is 2,835 in/s.

Why it matters

The calculator helps chemical, petroleum and materials engineers, students and researchers in microfluidics who study two-phase flow in capillaries, coating, printing, inkjet, enhanced oil recovery or the wetting of porous media, and who need to know which force controls the interface.

Good to know

Use the viscosity of the liquid in centipoise, the surface tension in dynes per centimeter (or millinewtons per meter) and a velocity that represents the motion of the interface. Water has a viscosity of about 1 cP and a surface tension of about 72 dyn/cm at 20 °C. Bretherton’s law is valid for a long bubble in a round tube with a perfectly wetting liquid at small capillary numbers, below about 0.003, and it overestimates the film at higher Ca or in rough or square channels.

The Reynolds number calculator compares inertia and viscosity, the Weber number calculator compares inertia and surface tension, the Bond number calculator compares gravity and surface tension and the capillary rise calculator gives the height of a liquid in a tube.

Frequently asked questions

What is the capillary number?

The capillary number is the ratio of viscous forces to surface tension forces, Ca = μ v / γ, where μ is the viscosity, v a characteristic velocity and γ the surface tension. It is dimensionless. When Ca is small the interface shape is controlled by surface tension, and when it is large the viscous stresses deform it.

Which values matter?

Below about 10⁻³, surface tension dominates, as in the slow imbibition of liquids in porous media or the flow of drops in microchannels. Between 10⁻³ and 10⁻¹ both forces matter, as in coating and printing. Above that, viscous forces control the shape, as in the spreading of oil or in the extrusion of polymers.

What is the Bretherton film?

When a long bubble moves in a capillary tube filled with a liquid that wets the wall, it leaves a thin film on the wall. Bretherton showed that its thickness is h ≈ 1.34 r Ca^(2/3), for Ca below about 3 × 10⁻³. The film thickens with the velocity and the viscosity, which explains the loss of liquid in slug flow.

How does it relate to the Reynolds and Weber numbers?

The Reynolds number compares inertia and viscosity, and the Weber number compares inertia and surface tension. The capillary number is Ca = We / Re, so it can be found from the other two. It is the natural number when inertia is negligible, as in small channels and porous media.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.