Skip to content
Omnikalc

Deborah number calculator: relaxation time against the time scale of the flow

Enter the relaxation time of a material and the length and velocity of the flow to get the Deborah number and to see whether it behaves like a fluid, a solid or a viscoelastic material.

Updated on
Your inputs
s

Value out of range

m

Value out of range

m/s

Value out of range

Results

Deborah number

4

Viscoelastic: both viscous and elastic effects matter
Time scale of the flow
0.5 s
Deformation rate
2 1/s

Is it a fluid or a solid? It depends on how fast you push it. The Deborah number calculator divides the relaxation time of a material by the time scale of the flow (length divided by velocity) and tells you whether the material behaves like a liquid, a solid or a viscoelastic material.

How the calculation works

  • Enter the relaxation time λ of the material: the time it takes to relax after a deformation.
  • Enter the characteristic length L and the characteristic velocity V of the flow or of the deformation.
  • The time scale of the flow is t = L / V, and the Deborah number is De = λ / t = λ V / L.
  • A small De means a fluid behavior, a large De a solid behavior, and a value around 1 a viscoelastic one.

Example

A polymer melt with a relaxation time of 2 s flows in a die 0.01 m wide at 0.02 m/s. The time scale of the flow is 0.01 / 0.02 = 0.5 s, so De = 2 / 0.5 = 4. The melt responds both as a liquid and as a solid, and shows elastic effects such as die swell at the exit.

Why it matters

The Deborah number is a key number in rheology, the science of flow. It guides the design of polymer processing (extrusion, injection molding, fiber spinning), the study of gels, foods and biological tissue, and the analysis of slow solid flows in geophysics such as glaciers and the Earth’s mantle.

Good to know

The calculator assumes a single relaxation time and a flow with one length scale and one velocity. Real materials have a spectrum of relaxation times, which depend on temperature, concentration and the deformation itself, and a flow can have several time scales. The regime limits at 0.1 and 10 are indicative, not sharp, and the transition between liquid-like and solid-like behavior is gradual. The value is a guide, which should be confirmed by a rheological test.

The Reynolds number calculator compares inertia and viscosity, the Prandtl number calculator compares momentum and heat diffusion, the Weber number calculator covers inertia against surface tension, and the Bond number calculator covers gravity against surface tension.

Frequently asked questions

What is the Deborah number?

It is the ratio of the time a material needs to relax, its relaxation time, to the time scale of the observation or of the process: De = λ / t. It was named by Markus Reiner after the prophetess Deborah, who sang that “the mountains flowed before the Lord”: for God, whose time of observation is infinite, even mountains flow.

How do I read the value?

If De is much smaller than 1, the material has time to relax and behaves like a viscous liquid. If De is much larger than 1, it does not have time to relax and behaves like an elastic solid. In between, around 0.1 to 10, the response is viscoelastic, with both effects. The same material can be a liquid slowly and a solid quickly: this is the case for silicone putty or for a glacier.

What are typical relaxation times?

Water relaxes in about 10⁻¹² s, so it is a liquid in any ordinary flow. Polymer melts relax in milliseconds to seconds, silicone putty in seconds to minutes, and glass in thousands of years at room temperature, which is why it can be seen as a solid. For ice in a glacier, the relaxation time is days to months.

What is the difference with the Weissenberg number?

Both compare a relaxation time with a flow time. The Weissenberg number uses the deformation rate, Wi = λ γ̇, and measures the nonlinearity of the response in a steady shear flow, while the Deborah number uses the time scale of the process, which is better for unsteady flows or for a transient test. For a steady flow with t = L/V, the two numbers have the same value.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.