A four-bar linkage is the simplest closed mechanism: four rigid links joined by four pivots, one of them fixed to the frame. It turns a rotation into an oscillation, as in windscreen wipers, pedal systems and many machines. The Grashof condition tells whether at least one link can turn through a full circle. This calculator tests it, names the type of mechanism and estimates the transmission angle, the rocker swing and the quick-return ratio.
How the calculation works
- Let s be the shortest link, l the longest, and p and q the other two.
- Grashof condition: s + l ≤ p + q
- Crank-rocker: Grashof and the shortest link is next to the fixed link (the crank)
- Double-crank: Grashof and the shortest link is the fixed link
- Double-rocker with a turning coupler: Grashof and the shortest link is the coupler
- Transmission angle (between coupler and rocker): cos μ = (c² + d² − a² − b² + 2ab cos θ) ÷ (2cd), checked at the two ends of the crank turn
- Quick-return ratio = (180° + β) ÷ (180° − β), where β is the crank angle between the two extreme positions of the rocker
Example
The ground link is 100, the crank 30, the coupler 90 and the rocker 70. The shortest link is 30 and the longest 100, so s + l = 130, while p + q = 160. The margin is 30, so the Grashof condition is met and the linkage is a crank-rocker. The worst transmission angle is 50.0°, above 40°, so force transmission is good. The rocker swings 51.8° and the quick-return ratio is 1.09.
Why it matters
Choosing lengths without checking the Grashof condition can give a mechanism that jams or cannot turn a full crank cycle. A small transmission angle makes the joints bind under load, which is why designers aim for 40° to 140°.
Good to know
The transmission angle, rocker swing and quick-return ratio assume that the second link is the crank. They are only meaningful for a crank-rocker that can be assembled, meaning each length is shorter than the sum of the three others. Real linkages also have link thickness, friction and clearances, and the analysis here is purely geometric.
In practice
Start with a Grashof linkage, then adjust the lengths until the transmission angle stays above 40° and the swing and return ratio fit the task. Draw the result at scale before building it. This tool is for education.