Skip to content
Omnikalc

Grashof number calculator: how strong is the buoyancy compared with viscosity?

Enter the surface and air temperatures, the height and the forced air speed to get the Grashof, Rayleigh and Richardson numbers and the type of convection.

Updated on
Your inputs
°F

Value out of range

°F

Value out of range

ft

Value out of range

ft/s

Value out of range

Results

Grashof number (× 10⁶)

92.52

Rayleigh number (× 10⁶)
65.69
Reynolds number of the forced flow
11,296
Richardson number Gr ÷ Re²
0.725
Mixed convection: both effects count
Film temperature
95.0 °F

Hot surfaces in air drive their own flow by buoyancy. The Grashof number calculator measures how strong this flow is from the surface temperature, the air temperature and the height, with air properties at the film temperature. It gives the Grashof and Rayleigh numbers, and with a forced air speed it also gives the Reynolds and Richardson numbers to tell the kind of convection.

How the calculation works

  • Enter the surface temperature, the air temperature, the vertical height of the surface and the speed of the forced air (use 0.01 for still air).
  • The calculator takes the properties of air at the film temperature and finds the Grashof number Gr = g β ΔT L³ / ν², with β = 1/T for an ideal gas.
  • The Rayleigh number is Ra = Gr × Pr, with Pr = 0.71 for air.
  • The Richardson number Gr / Re² compares buoyancy with the forced flow: below 0.1 forced convection rules, above 10 natural convection rules, and in between it is mixed.

Example

A vertical surface 1 ft high at 120 °F is in air at 70 °F with a 2 ft/s draft. The film temperature is 95 °F. The Grashof number is 92.5 million, the Rayleigh number is 65.7 million, and the Reynolds number is 11,296. The Richardson number is 0.725, so the convection is mixed: neither the draft nor the buoyancy can be ignored.

Why it matters

The Grashof and Richardson numbers decide which heat transfer correlations to use for a hot plate, a radiator, an electronic board or a room surface. They show whether a fan or a draft is strong enough to ignore buoyancy, or whether the natural convection must be included in the calculation.

Good to know

The calculator is for air at normal pressure, using fixed values of the Prandtl number (0.71) and the ideal gas expansion coefficient, with properties from Sutherland’s law. The Richardson criterion is a rule of thumb, and it depends on the geometry and the relative direction of the flows. For other fluids, such as water or oil, the properties and the Prandtl number are different and must be taken from tables.

The natural convection calculator gives the heat transfer for a vertical plate, the Prandtl number calculator covers the fluid property, the Reynolds number calculator covers the forced flow, and the Nusselt number calculator covers the heat transfer coefficient.

Frequently asked questions

What is the Grashof number?

It is Gr = g β ΔT L³ / ν², the ratio of the buoyancy force that comes from the temperature difference to the viscous force that resists the motion. In natural convection it plays the role that the Reynolds number plays in forced flow. A larger Gr means a stronger flow and a better heat transfer.

What is the difference between the Grashof and Rayleigh numbers?

The Rayleigh number is the product of the Grashof number and the Prandtl number, Ra = Gr × Pr. Heat transfer correlations for natural convection are usually written in terms of Ra, and the transition from laminar to turbulent flow on a vertical surface happens at Ra of about 10⁹.

What is mixed convection?

It is the case where a forced flow and buoyancy are of similar strength. The Richardson number Gr / Re² measures this ratio. When Ri is between about 0.1 and 10, the heat transfer coefficient is not given by natural or forced convection alone, and the flows can aid or oppose each other depending on their directions.

Why does the film temperature matter?

The viscosity, the density and the thermal expansion of air depend strongly on temperature. The usual rule is to evaluate them at the film temperature, the average of the surface and the free-stream temperatures, which gives a good result for moderate temperature differences.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.