Skip to content
Omnikalc

Blast ground vibration PPV and scaled distance calculator

Enter the distance, the charge weight per delay, the site constants and the limit to get the scaled distance, the peak particle velocity, the ratio to the limit and the maximum charge per delay.

Updated on
Your inputs
ft

Value out of range

lb

Value out of range

Value out of range

Value out of range

in/s

Value out of range

Results

Ratio of the velocity to the limit

0.92

Close to the limit: reduce the charge per delay or monitor the blast
Scaled distance
30.0 ft/lb½
Peak particle velocity
0.693 in/s
Maximum charge per delay for the limit
110.4 lb

The blast ground vibration PPV and scaled distance calculator gives the scaled distance, the peak particle velocity, the ratio of the velocity to the limit and the maximum charge per delay for a blast near a structure, from the distance, the charge and the site constants.

How the calculation works

  • Enter the distance to the structure and the charge weight per delay.
  • Enter the site constants K and the exponent, and the limit of the peak particle velocity.
  • The calculator finds the scaled distance, the peak particle velocity, the ratio to the limit and the maximum charge per delay.

Example

A blast with 100 lb per delay, at 300 ft from a house, has a scaled distance of 300 / √100 = 30.0 ft/lb½. With K = 160 and an exponent of 1.6, the peak particle velocity is 160 × 30^-1.6 = 0.693 in/s. For a limit of 0.75 in/s, the ratio is 0.92. The maximum charge per delay for this limit is 110.4 lb.

Why it matters

The calculator helps blasting engineers, contractors, inspectors and students to make a first estimate of the vibration of a blast, to find the charge per delay that keeps the vibration under the limit, and to prepare the monitoring of the blasts near buildings and utilities.

Good to know

Do a survey of the structures before the blasting and place a seismograph at the nearest one. Start with small blasts to find the constants of the site, and adjust the charge per delay as you get the data. Keep the records of every blast, and use more delays rather than a bigger charge when the structures are near. Warn the neighbors before each blast, and keep a copy of the records for the insurance.

The blast hole calculator gives the charge and the powder factor of a bench blast, the dynamic compaction calculator gives the depth of influence of the ground impact, the vibration isolation calculator sizes machine mounts and the pile driving formula calculator gives the capacity of a driven pile.

Frequently asked questions

What is the scaled distance?

The scaled distance is the distance from the blast to the structure divided by the square root of the charge weight per delay. It is the key parameter of the vibration of a blast, because a bigger charge needs a bigger distance to give the same vibration. The square root scaling is the usual one for the ground vibration, and the cube root scaling is used for the air overpressure.

How is the peak particle velocity predicted?

The peak particle velocity is predicted by a power law of the scaled distance: PPV = K × SD^-β. The constants K and β depend on the rock, the soil, the blast design and the direction, and they are found by regression from the measurements of the previous blasts of the site. Typical values in US units are K between 100 and 242 and β near 1.6, and the values are only a first estimate before the first blasts.

What is the maximum charge per delay?

For a given limit of velocity, the minimum scaled distance is found from the law, and the maximum charge per delay is the square of the distance divided by this scaled distance. A delay is an interval of at least 8 ms between two charges, so that their vibrations do not add. A way to reduce the vibration is to use more delays and to split the charge.

What are the limits of the calculator?

The calculator uses a simple law with constants that you give. It does not predict the frequency of the vibration, the response of the structure, the effect of the rock layers and of the direction, the air overpressure, the flyrock or the scatter of the results. The limits of the standards depend on the frequency, and a seismograph must be used to monitor the blasts.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.