Skip to content
Omnikalc

Embankment seepage flow net discharge calculator

Enter the hydraulic conductivity, the head, the flow channels, the equipotential drops and the length to get the seepage per foot, the total seepage and the flow in gpm.

Updated on
Your inputs
ft/day

Value out of range

ft

Value out of range

Value out of range

Value out of range

ft

Value out of range

Results

Total seepage

5,333 ft³/day

Seepage per foot of embankment
6.67 ft³/day/ft
Total seepage in gallons per minute
27.7 gpm
Head loss at each equipotential drop
3.33 ft

The embankment seepage flow net calculator gives the seepage per unit length, the total seepage, the flow in gallons per minute and the head loss per equipotential drop, from the hydraulic conductivity, the head and the counts of flow channels and drops of a flow net.

How the calculation works

  • Enter the hydraulic conductivity of the soil and the head difference across the embankment.
  • Enter the number of flow channels and of equipotential drops counted on the flow net, and the length of the embankment.
  • The calculator finds the seepage per foot, the total seepage, the flow in gallons per minute and the head loss per drop.

Example

An embankment with a hydraulic conductivity of 0.5 ft/day, a head of 40 ft, 4 flow channels and 12 equipotential drops has a seepage of 0.5 × 40 × 4 / 12 = 6.67 ft³/day per foot. Over 800 ft the total is 5,333 ft³/day, that is 27.7 gpm, and each drop loses 40 / 12 = 3.33 ft of head.

Why it matters

The calculator helps geotechnical engineers, dam and levee designers, contractors and students to estimate the seepage under or through an earth structure, to size a drain or a pump, and to compare the effect of the conductivity and the head.

Good to know

Use the conductivity of the soil from field or laboratory tests, in the same units as the length and the time, and remember that the real conductivity can differ by a factor of 10 or more from the test. Use a conservative high value to size drains and pumps and a low value to check the pressures. Draw the net with at least 4 flow channels to limit the error.

The Darcy’s law calculator gives the flow through a soil sample, the soil permeability test calculator gives the conductivity from a test, the piping safety factor calculator checks the exit gradient and the infiltration trench sizing calculator sizes a trench that infiltrates water.

Frequently asked questions

What is a flow net?

A flow net is a drawing of two sets of lines that cross at right angles: the flow lines, along which the water moves, and the equipotential lines, along which the head is constant. It is drawn for the cross-section of a dam, a levee or a cofferdam under a seepage that is steady. The lines form curved squares, and the number of flow channels Nf and of equipotential drops Nd gives the seepage.

What is the equation of the seepage?

The flow per unit length of the embankment is q = k H Nf / Nd, where k is the hydraulic conductivity of the soil, H is the total head loss from the upstream to the downstream side, Nf is the number of flow channels and Nd is the number of equipotential drops. It comes from Darcy's law applied to each curved square. The head lost in each drop is H / Nd.

How do I find the numbers of channels and drops?

Draw the flow net by trial and adjustment, or use a published net for a similar section, or a computer program. Make sure that the squares are close to real squares. The ratio Nf / Nd is called the shape factor, and it is typically between 0.2 and 0.6 for a dam on a permeable foundation. The calculator takes the two counts you found.

What are the limits of the calculator?

The calculator uses the equation for a homogeneous and isotropic soil with a steady flow. It does not handle layered soils, a core or a drain with a different conductivity, a transient flow, an anisotropic soil or the unsaturated flow above the phreatic line. It gives the flow only, and the exit gradient and the safety against piping must be checked separately.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.