The expansive soil swell and heave calculator gives the effective swell strain, the potential heave and the differential heave of a slab or a footing on a swelling clay, from the depth of the active layer, the swell potential and the part of the layer that gets wet.
How the calculation works
- Enter the depth of the active layer, where the water content changes with the seasons.
- Choose the swell potential of the clay and the part of the layer that gets wet.
- The calculator finds the effective swell strain, the potential heave and the differential heave.
Example
An active layer of 4.5 ft has a medium swell potential of 3 %, and 60 % of the layer gets wet. The effective strain is 3 × 0.60 = 1.80 %. The potential heave is 4.5 × 12 × 1.80 / 100 = 0.97 in. If the differential heave is taken as half of it, it is 0.49 in between two points of the slab.
Why it matters
The calculator helps geotechnical engineers, foundation designers, builders and students to see the order of magnitude of the movement of an expansive soil, to choose between a stiffened slab and a deep foundation, and to see how the moisture control reduces the heave.
Good to know
Control the moisture around the foundation with a good drainage, gutters that discharge far from the walls, a slope away from the building and no tree too close. Keep the moisture of the soil constant during the construction, and do not leave the clay to dry out and to be wetted again before the slab is cast. Plan the plumbing with flexible joints, because a broken pipe is a source of water that makes the heave worse.
Related tools
The soil compaction calculator checks the density of a fill, the CBR calculator gives the modulus of a subgrade, the buried pipe earth load calculator gives the load on a pipe and the earthwork swell and shrink calculator gives the volumes of an excavation.