Skip to content
Omnikalc

Construction hoarding wind load and ballast calculator

Enter the wind speed, the exposure, the force coefficient, the height, the post spacing, the base width and the safety factor to get the wind force, the moment and the ballast per post.

Updated on
Your inputs
mph

Value out of range

Value out of range

Value out of range

ft

Value out of range

ft

Value out of range

ft

Value out of range

Value out of range

lb

Value out of range

Results

Ballast required per post

5,868 lb

Velocity pressure
14.98 psf
Wind force on one post
1,223 lb
Overturning moment at the base
4,890 lb-ft
Ballast blocks per post
3

The construction hoarding wind load and ballast calculator gives the velocity pressure, the wind force on a post, the overturning moment at the base, the ballast required per post and the number of ballast blocks for a free-standing site hoarding or fence, from the wind speed, the height and the post spacing.

How the calculation works

  • Enter the wind speed, the exposure coefficient and the force coefficient of the hoarding.
  • Enter the height, the spacing of the posts, the width of the base and the safety factor.
  • The calculator finds the pressure, the force on a post, the overturning moment and the ballast required.

Example

At 90 mph with Kz = 0.85, the velocity pressure is 0.00256 × 0.85 × 0.85 × 90² = 14.98 psf. A hoarding of 8 ft with posts every 8 ft and a force coefficient of 1.5 takes 14.98 × 0.85 × 1.5 × 8 × 8 = 1,223 lb per post, with a moment of 4,890 lb-ft. For a base of 2.5 ft and a safety factor of 1.5, the ballast is 5,868 lb, that is 3 blocks of 2,000 lb.

Why it matters

The calculator helps site managers, safety officers, fence contractors and students to check that a hoarding or a screen does not overturn in the wind, to size the ballast of the temporary bases, and to see how the wind speed and the height change the loads.

Good to know

Use the wind speed of the standard for the place and for the duration of the work. Increase the ballast at the corners and the ends, and tie the panels to the posts and the posts to each other. Take down the windscreens and the banners before a storm, and inspect the bases and the ballast after each strong wind.

The crane lift utilization calculator checks a lift with the wind, the silt fence calculator counts the posts and the fabric of a sediment fence, the fence post depth calculator sizes the embedment of a post and the hurricane tie-down uplift force calculator checks the uplift of a roof.

Frequently asked questions

Why does a hoarding need a wind check?

A solid hoarding, or a site fence with a windscreen, works like a sail in the wind. The wind pressure on a wall of 8 ft and of 100 ft of length gives a force of several tons, and a hoarding without enough weight or foundation can be overturned and fall on the public. The failures of the hoardings in storms are a known risk on the construction sites in cities.

How is the wind force found?

The velocity pressure is 0.00256 times the exposure coefficient, the directionality factor and the wind speed squared in mph, which gives psf. The force on a free-standing wall is the pressure times the gust factor, times the force coefficient, times the area of the wall. The force coefficient is larger for a long wall near the ground, and the exact value is found in the wind standard.

How is the ballast found?

The wind force acts at about half the height of the hoarding, and it gives a moment about the toe of the base. The ballast weight, acting at the middle of the base, must give a resisting moment at least equal to the overturning moment times the safety factor. A wider base needs less ballast, and a post in the ground resists by its embedment instead.

What are the limits of the calculator?

The calculator gives the ballast for a simple free-standing hoarding in a steady wind. It does not take into account the corners and the ends of the wall, where the pressures are higher, the porosity of a mesh with a windscreen, the sliding of the base, the strength of the posts and of the panels, or the local rules of the city. The design wind speed and the factors must come from the standard of the place.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.